Interfacial tension and contact angle of asphaltenic and resinous model oil in the presence of binary salts mixtures

Using smart or low salinity waters known as green processes gained increasing attention due to their unique features and their positive impacts on the environment. In light of this fact and since there is limited knowledge about the effects of salts under engineered concentrations or binary mixtures and crude oil fractions on the interfacial tension (IFT) reduction and wettability alteration of the resinous (RSO) and asphaltenic synthetic oil (ASO), the current investigation is designed and performed for the first time. Moreover, the dynamic behavior of the IFT variation was carefully investigated and the relaxation time was obtained and modeled to see the impact of mono and divalent salts individually and in binary conditions. The relaxation times revealed that the lowest adsorption times were obtained for NaCl/CaCl2 brine regardless of the examined oil types of ASO and RSO due to the high movement affinity of the polar functional groups toward the interface consequently reducing the required time for coverage and packing of active agents at the interface. Finally, the measured contact angle values revealed a significant effect of binary salts on the wettability alteration toward strongly water-wet conditions, especially for the RSO and ASO compared with crude oil.