Frequency multiplexing enables parallel multi-sample EPR

Electron paramagnetic resonance (EPR) spectroscopy stands out as a powerful analytical technique with extensive applications in the fields of biology, chemistry, physics, and material sciences. It proves invaluable for investigating the molecular structure and reaction mechanisms of substances containing unpaired electrons, such as metal complexes, organic and inorganic radicals, and intermediate states in chemical reactions. However, despite their remarkable capabilities, EPR systems face significant limitations in terms of sample throughput, as current commercial systems only target the analysis of one sample at a time. Here we introduce a novel scheme for conducting ultra-high frequency continuous-wave EPR (CW EPR) targeting the EPR spectroscopy of multiple microliter volume samples in parallel. Our proof-of-principle prototype involves two decoupled detection cells equipped with high qualty factor \(Q=104\) $Q=104$ solenoidal coils tuned to 488 and 589 MHz, ensuring a significant frequency gap for effective radio frequency (RF) decoupling between the channels. To further enhance electromagnetic decoupling, an orthogonal alignment of the coils was adopted. The paper further presents an innovative radiofrequency circuit concept that utilizes a single physical RF channel to simultaneously conduct parallel EPR on up to eight cells. Parallel EPR experiments on two BDPA samples, each with a sample volume of 18.3 μL, registered signal-to-noise ratios of 255 and 252 for the two EPR measurement cells, with no observable coupling. The showcased prototype, built using cost-effective commercially available fabrication technology, is readily scalable and represents an initial step with promising potential for advancing sample screening with high-throughput parallel EPR.