Continuous adiabatic frequency conversion for FMCW-LiDAR

Continuous tuning of the frequency of laser light serves as the fundamental basis for a myriad of applications spanning basic scientific research to industrial settings. These applications encompass endeavors such as the detection of gravitational waves, the development of precise optical clocks, environmental monitoring for health and ecological purposes, as well as distance measurement techniques. However, achieving a broad tuning range exceeding 100 GHz along with sub-microsecond tuning times, inherent linearity in tuning, and coherence lengths beyond 10 m presents significant challenges. Here, we demonstrate that electro-optically driven adiabatic frequency converters utilizing high-Q microresonators fabricated from lithium niobate possess the capability to convert arbitrary voltage signals into frequency chirps with temporal resolutions below 1 µs. The temporal evolution of the frequency correlates accurately with the applied voltage signal. We have achieved to generate 200-ns-long frequency chirps with deviations of less than 1 % from perfect linearity without requiring supplementary measures. The coefficient of determination is \(R^2>0.999\) $R^2>0.999$ . Moreover, the coherence length of the emitted light exceeds 20 m. To validate these findings, we employ the linear frequency sweeps for Frequency-Modulated Continuous Wave (FMCW) LiDAR covering distances ranging from 0.5 to 10 m. Leveraging the demonstrated nanosecond-level tuning capabilities, coupled with the potential to tune the eigenfrequency of lithium-niobate-based resonators by several hundred GHz, our results show that electro-optically driven adiabatic frequency converters can be used in applications that require ultrafast and flexible continuous frequency tuning characterized by inherent linearity and substantial coherence length.