Scholarlink

<p>Flexible perovskite/copper indium gallium selenide (CIGS) tandem solar cells hold great promise for lightweight, high-efficiency applications, yet achieving high-quality perovskite top cells on the rough surfaces of flexible CIGS bottom cells remains challenging. Accordingly, we developed an antisolvent-seeding strategy that decouples self-assembly monolayers (SAMs) adsorption from dissolution, while integrating perovskite seeding. A high-polarity solvent prevents SAMs clustering during dissolution, while a low-polarity antisolvent promotes high-density SAMs formation during adsorption. Additionally, a pre-mixed seed layer further improves perovskite wettability, crystallinity and adhesion. These advancements enable the fabrication of a 1.09-cm<sup>2</sup> flexible monolithic perovskite/CIGS tandem with a stabilized efficiency of 24.6% (certified 23.8%), comparable to the best-performing rigid perovskite/CIGS tandems and representing one of the highest efficiencies among flexible thin-film solar cells. The flexible devices also demonstrate excellent durability, retaining over 90% of initial performance after 320 h of operation and 3,000 bending cycles at a 1-cm radius.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Antisolvent seeding of self-assembled monolayers for flexible monolithic perovskite/Cu(In,Ga)Se2 tandem solar cells

  • 期刊论文

  • 发表日期：

    2025年4月18日

查看全文
  • Zhiqin Ying,
  • Shiqian Su,
  • Xin Li,
  • Guoxin Chen,
  • Chongyan Lian,
  • Dikai Lu,
  • Meili Zhang,
  • Xuchao Guo,
  • Hao Tian,
  • Yihan Sun,
  • Linhui Liu,
  • Chuanxiao Xiao,
  • Yuheng Zeng,
  • Chao Zhang,
  • Xi Yang,
  • Jichun Ye

摘要

Flexible perovskite/copper indium gallium selenide (CIGS) tandem solar cells hold great promise for lightweight, high-efficiency applications, yet achieving high-quality perovskite top cells on the rough surfaces of flexible CIGS bottom cells remains challenging. Accordingly, we developed an antisolvent-seeding strategy that decouples self-assembly monolayers (SAMs) adsorption from dissolution, while integrating perovskite seeding. A high-polarity solvent prevents SAMs clustering during dissolution, while a low-polarity antisolvent promotes high-density SAMs formation during adsorption. Additionally, a pre-mixed seed layer further improves perovskite wettability, crystallinity and adhesion. These advancements enable the fabrication of a 1.09-cm2 flexible monolithic perovskite/CIGS tandem with a stabilized efficiency of 24.6% (certified 23.8%), comparable to the best-performing rigid perovskite/CIGS tandems and representing one of the highest efficiencies among flexible thin-film solar cells. The flexible devices also demonstrate excellent durability, retaining over 90% of initial performance after 320 h of operation and 3,000 bending cycles at a 1-cm radius.