Scholarlink

<p>This study investigates the hydrogen embrittlement resistance of directed energy deposition additive manufactured 316 L stainless steels with heat treatments. The hydrogen embrittlement sensitivity has been examined through microstructural investigation correlated with grain orientation and dislocation density. The synergistic effect of heat-treatment and hydrogen on strain distribution and instability evolution behavior was revealed. The heat treatment reduced the sub-grain structure and dislocation density, resulting in a more homogeneous microstructure with trace of recrystallization. Hydrogen uptake behavior was closely affected by the microstructure changes and thus hydrogen embrittlement sensitivity was reduced by increasing annealing temperature. AMed samples after heat treatment have a similar hydrogen embrittlement index with conventional manufactured samples. In the heat treated 1200 °C specimens, more strain and instability hotspots were initiated, becoming uniformly distributed and developed. In contrast, the AMed samples initiated fewer strain accumulation sites, which developed into stress/strain concentration areas, leading to wider secondary cracks and ultimate failure.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhanced hydrogen embrittlement resistance of directed energy deposition 316 L by post-manufacturing heat treatment

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月27日

查看全文
  • Qingyang Liu,
  • Yan Yan,
  • Muhammad Zeeshan Iqbal,
  • Mohammad Tariq,
  • Afrooz Barnoush,
  • Brahim Aissa,
  • Hanan Farhat

摘要

This study investigates the hydrogen embrittlement resistance of directed energy deposition additive manufactured 316 L stainless steels with heat treatments. The hydrogen embrittlement sensitivity has been examined through microstructural investigation correlated with grain orientation and dislocation density. The synergistic effect of heat-treatment and hydrogen on strain distribution and instability evolution behavior was revealed. The heat treatment reduced the sub-grain structure and dislocation density, resulting in a more homogeneous microstructure with trace of recrystallization. Hydrogen uptake behavior was closely affected by the microstructure changes and thus hydrogen embrittlement sensitivity was reduced by increasing annealing temperature. AMed samples after heat treatment have a similar hydrogen embrittlement index with conventional manufactured samples. In the heat treated 1200 °C specimens, more strain and instability hotspots were initiated, becoming uniformly distributed and developed. In contrast, the AMed samples initiated fewer strain accumulation sites, which developed into stress/strain concentration areas, leading to wider secondary cracks and ultimate failure.