Scholarlink

<p>All-inorganic perovskite solar cells (PSCs) have emerged as a prominent research focus because the high thermal/photo stability they can offer is critical to commercialization of the burgeoning photovoltaic (PV) technology. However, there remain issues pertaining to the susceptibility of the all-inorganic perovskites to surface degradation from moisture ingress under ambient conditions and the suboptimal PV efficiency that still lags substantially behind that of their organic-inorganic hybrid counterparts. To address these challenges, this work employs an in situ self-assembly strategy to construct a 1D/3D perovskite heterojunction on top of the all-inorganic perovskite using tetrabutylammonium trifluoromethanesulfonate (TTFS). While typical ammonium salts only provide a cationic barrier or weak passivation, the TTFS-based design uniquely synergizes a hydrophobic cationic barrier with strong anionic passivation, and concurrently creates fast electron extraction channels through a nanostructured interface. This approach overcomes the conventional trade-off between stability and efficiency. By exploiting it to optimize a semi-transparent wide-band PSC for 4-terminal (4-T) tandem devices, a certified power conversion efficiency (PCE) of 17.10% was achieved together with exceptional operational stability under maximum power point (MPP) tracking—maintaining 80% of the initial PCE (<i>T</i><sub>80</sub>) after operating for 1210 hours at 65 °C and 650 hours at 85 °C (ISOS-L-2). When it is combined with a narrow-band all-inorganic PSC in the 4-T tandem configuration, a certified efficiency of 21.54% was obtained, which is the highest reported for this type of tandem cells. Through synergistic optimization of interface stabilization and tandem optoelectronic management, this work provides valuable insights for developing efficient and stable all-inorganic perovskite tandem solar cells.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Self-assembled 1D/3D heterojunction enables all-inorganic perovskite 4-terminal tandem solar cells with 21.54% certified efficiency

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年4月27日

查看全文
  • Hao Zhang,
  • Mingyu Hu,
  • Qingqing Zhang,
  • Yen-Hung Lin,
  • Qiang Lou,
  • Maojun Sun,
  • Yueyu Xu,
  • Yi He,
  • Kai Zhang,
  • Shanshan Yu,
  • Haifeng Wu,
  • Haibiao Chen,
  • Linling Li,
  • Liting Zeng,
  • Xinxin Xu,
  • Jiazheng Wang,
  • Jingyi Xu,
  • Dezhen Kong,
  • Jin Shang,
  • Yuqing Su,
  • Xiangyu Li,
  • Changqing Lin,
  • Fion Sze Yan Yeung,
  • Hang Zhou,
  • Shihe Yang

摘要

All-inorganic perovskite solar cells (PSCs) have emerged as a prominent research focus because the high thermal/photo stability they can offer is critical to commercialization of the burgeoning photovoltaic (PV) technology. However, there remain issues pertaining to the susceptibility of the all-inorganic perovskites to surface degradation from moisture ingress under ambient conditions and the suboptimal PV efficiency that still lags substantially behind that of their organic-inorganic hybrid counterparts. To address these challenges, this work employs an in situ self-assembly strategy to construct a 1D/3D perovskite heterojunction on top of the all-inorganic perovskite using tetrabutylammonium trifluoromethanesulfonate (TTFS). While typical ammonium salts only provide a cationic barrier or weak passivation, the TTFS-based design uniquely synergizes a hydrophobic cationic barrier with strong anionic passivation, and concurrently creates fast electron extraction channels through a nanostructured interface. This approach overcomes the conventional trade-off between stability and efficiency. By exploiting it to optimize a semi-transparent wide-band PSC for 4-terminal (4-T) tandem devices, a certified power conversion efficiency (PCE) of 17.10% was achieved together with exceptional operational stability under maximum power point (MPP) tracking—maintaining 80% of the initial PCE (T80) after operating for 1210 hours at 65 °C and 650 hours at 85 °C (ISOS-L-2). When it is combined with a narrow-band all-inorganic PSC in the 4-T tandem configuration, a certified efficiency of 21.54% was obtained, which is the highest reported for this type of tandem cells. Through synergistic optimization of interface stabilization and tandem optoelectronic management, this work provides valuable insights for developing efficient and stable all-inorganic perovskite tandem solar cells.