Scholarlink

<p>Wind turbines provide renewable power with near-zero CO<sub>2</sub> emissions, but struggle to achieve steady electricity supply, owing to inherent wind speed variability. Hence, clean energy carriers, such as ‘green’ hydrogen from electrolysis, are required to balance daily power output, and minimise reliance on dispatchable fossil fuels during periods of insufficient wind. Here, we present a system for integrating solid-state hydrogen storage with carbon capture via magnesium looping, using waste heat from the hydrogen storage reaction to drive the process. Incorporating magnesium looping as thermo-chemical energy storage overcomes a major limitation of solid-state hydrogen storage (poor thermal efficiency), and offsets CO<sub>2</sub> emissions from the use of back-up gas turbine capacity. Thermal integration of the MgH<sub>2</sub> storage improved round-trip efficiency (conversion from electricity to stored H<sub>2</sub>, and back to electricity) to &#xa0;~&#xa0;19%, comparable to liquid or gas storage, whereas MgH<sub>2</sub> alone without heat recovery is limited to &#xa0;~&#xa0;4%. We model power supply and energy storage over five years for onshore and offshore windfarms using real-world data, finding combined hydrogen storage with magnesium looping is the only system able to meet daily electricity demand and compensate for seasonal wind capacity factor variation, while offsetting CO<sub>2</sub> operating emissions from flexible gas deployment.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Thermally coupled solid hydrogen storage and carbon capture for balancing intermittent renewable energy

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年4月21日

查看全文
  • Alexander R. P. Harrison,
  • George J. Fulham,
  • Haoliang Hong,
  • Binjian Nie

摘要

Wind turbines provide renewable power with near-zero CO2 emissions, but struggle to achieve steady electricity supply, owing to inherent wind speed variability. Hence, clean energy carriers, such as ‘green’ hydrogen from electrolysis, are required to balance daily power output, and minimise reliance on dispatchable fossil fuels during periods of insufficient wind. Here, we present a system for integrating solid-state hydrogen storage with carbon capture via magnesium looping, using waste heat from the hydrogen storage reaction to drive the process. Incorporating magnesium looping as thermo-chemical energy storage overcomes a major limitation of solid-state hydrogen storage (poor thermal efficiency), and offsets CO2 emissions from the use of back-up gas turbine capacity. Thermal integration of the MgH2 storage improved round-trip efficiency (conversion from electricity to stored H2, and back to electricity) to  ~ 19%, comparable to liquid or gas storage, whereas MgH2 alone without heat recovery is limited to  ~ 4%. We model power supply and energy storage over five years for onshore and offshore windfarms using real-world data, finding combined hydrogen storage with magnesium looping is the only system able to meet daily electricity demand and compensate for seasonal wind capacity factor variation, while offsetting CO2 operating emissions from flexible gas deployment.