Scholarlink

<p>Strain hardening is a crucial property of metals and alloys that directly affects their mechanical processability, safe usage, and durability throughout their service life. However, titanium alloys traditionally used in structural applications often exhibit limited strain hardening, restricting their broader use. In this work, we demonstrate that by employing additive manufacturing (AM), strong strain hardening with high strength can be simultaneously achieved in a commercially available titanium alloy. These remarkable properties arise from a martensitic microstructure originated from the AM process. The microstructure is characterized by nanosized martensite plates with extremely fine triple-twinned substructures. During tensile deformation, detwinning rather than dislocation slip gradually transforms this microstructure into single-twinned lamellae with ~10 nm twin boundary spacing and internal stacking faults, necessitating progressively higher stresses and resulting in significant strain hardening.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Achieving high strain hardening and strength in an additively manufactured titanium alloy

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年11月20日

查看全文
  • Huizhi Peng,
  • Yuman Zhu,
  • Jun Wang,
  • Jiaming Zhu,
  • Jianwen Liu,
  • Kai Zhang,
  • Peter Lynch,
  • Hamish L. Fraser,
  • Peter Hodgson,
  • Martin Heilmaier,
  • Nick Birbilis,
  • Yunzhi Wang,
  • Aijun Huang

摘要

Strain hardening is a crucial property of metals and alloys that directly affects their mechanical processability, safe usage, and durability throughout their service life. However, titanium alloys traditionally used in structural applications often exhibit limited strain hardening, restricting their broader use. In this work, we demonstrate that by employing additive manufacturing (AM), strong strain hardening with high strength can be simultaneously achieved in a commercially available titanium alloy. These remarkable properties arise from a martensitic microstructure originated from the AM process. The microstructure is characterized by nanosized martensite plates with extremely fine triple-twinned substructures. During tensile deformation, detwinning rather than dislocation slip gradually transforms this microstructure into single-twinned lamellae with ~10 nm twin boundary spacing and internal stacking faults, necessitating progressively higher stresses and resulting in significant strain hardening.