<p>The coin cast during the Joseon Dynasty (14th–20th) is called <i>Sangpyeong Tongbo</i>, and was first minted in the 17th century. This study analysed the components on 134 samples of <i>Sangpyeong Tongbo</i> from the 18th and 19th centuries, and three samples were selected to analyse the manufacturing methods and materials through internal impurity observations, composition, and microstructures. An optical microscope, scanning electron microscope, and transmission electron microscope were used to observe the microstructures, and X-ray fluorescence analysis and energy dispersive X-ray spectroscopy were used for component analysis. Inside the coins, impurities were detected, all of which seem to have originated from copper or lead ore. The poor quality of the <i>Sangpyeong Tongbo</i>, as documented in historical records describing the mixing of rubble stone to reduce coin quality, suggests that large amounts of lead were added to increase the weight, and that copper or lead ore were used without sufficient smelting.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

A study on the manufacturing method of the ancient coins, Sangpyeong Tongbo in Korea

  • Jung Eun Choi

摘要

The coin cast during the Joseon Dynasty (14th–20th) is called Sangpyeong Tongbo, and was first minted in the 17th century. This study analysed the components on 134 samples of Sangpyeong Tongbo from the 18th and 19th centuries, and three samples were selected to analyse the manufacturing methods and materials through internal impurity observations, composition, and microstructures. An optical microscope, scanning electron microscope, and transmission electron microscope were used to observe the microstructures, and X-ray fluorescence analysis and energy dispersive X-ray spectroscopy were used for component analysis. Inside the coins, impurities were detected, all of which seem to have originated from copper or lead ore. The poor quality of the Sangpyeong Tongbo, as documented in historical records describing the mixing of rubble stone to reduce coin quality, suggests that large amounts of lead were added to increase the weight, and that copper or lead ore were used without sufficient smelting.