Scholarlink

<p>The current study is focused on the static and dynamic behavior of different 3D-printed lattice structures fabricated by selective laser sintering (SLS) technique. To this end, body-centered cubic and face-centered cubic lattice structures were designed and printed using polyamide 12 (PA&#xa0;12) material. A series of compression tests were performed on the lattice specimens under static loading conditions. We used the conventional split Hopkinson pressure bar (SHPB) at the impact speed of 12&#xa0;m/s to determine the dynamic behavior of 3D-printed structures under high strain rate. In experimental practices, a high-speed camera was utilized as non-contact optical technique to document the process from initial impact till the specimen failure. In addition, finite element models were developed to determine the dynamic mechanical response of the lattice models. The experimental results indicated that the compressive strength increased with the loading rate. It confirmed the strain rare sensitivity of the studied PA&#xa0;12. The results of this study can be employed to enhance the design of 3D-printed lattice structures for their further engineering applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Mechanical fracture of lattice structures fabricated by selective laser sintering

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年2月20日

查看全文
  • Mohammad Reza Khosravani,
  • Sören Bieler,
  • Kerstin Weinberg,
  • Tamara Reinicke

摘要

The current study is focused on the static and dynamic behavior of different 3D-printed lattice structures fabricated by selective laser sintering (SLS) technique. To this end, body-centered cubic and face-centered cubic lattice structures were designed and printed using polyamide 12 (PA 12) material. A series of compression tests were performed on the lattice specimens under static loading conditions. We used the conventional split Hopkinson pressure bar (SHPB) at the impact speed of 12 m/s to determine the dynamic behavior of 3D-printed structures under high strain rate. In experimental practices, a high-speed camera was utilized as non-contact optical technique to document the process from initial impact till the specimen failure. In addition, finite element models were developed to determine the dynamic mechanical response of the lattice models. The experimental results indicated that the compressive strength increased with the loading rate. It confirmed the strain rare sensitivity of the studied PA 12. The results of this study can be employed to enhance the design of 3D-printed lattice structures for their further engineering applications.