Scholarlink

<p>In order to improve the structural performance of the GIL contact finger, this paper takes the 550&#xa0;kV GIL spring contact finger as the research object, explores its temperature distribution law under the rated current of 5500&#xa0;A, and combines the dung-beetle optimization algorithm with the optimization scheme of the spring contact finger structure. Through the electro-thermal coupling analysis, it is found that the contact temperature rise of the contact finger decreases proportionally with the increase of the spring wire diameter, the number of spring coils, and the inclination angle of the single-coil spring, and the spring mid-diameter is too large or too small, which will increase the temperature rise of the contact finger, and the angle of the contact seat V-groove has a small influence on the temperature rise. Optimization results demonstrate that the selected spring finger structure parameters include a spring wire diameter (d) of 2&#xa0;mm, a spring mid-diameter (Ф) of 133&#xa0;mm, 147 coils (n) for the spring, a single-coil spring tilt angle (α) of 60°, and a contact seat V-groove angle (β) of 120°, resulting in a temperature rise of the finger of 47.57&#xa0;K, indicating effective optimization.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimization of 550 kV GIL Spring Contact Finger Structure Based on Electro-thermal Coupling Analysis

  • 期刊论文

  • 发表日期：

    2025年3月18日

查看全文
  • Miaomiao Chen,
  • Hao Yang,
  • Meng Cong,
  • Sirui Zhao,
  • Jianlong Ma,
  • Fusheng Zhou

摘要

In order to improve the structural performance of the GIL contact finger, this paper takes the 550 kV GIL spring contact finger as the research object, explores its temperature distribution law under the rated current of 5500 A, and combines the dung-beetle optimization algorithm with the optimization scheme of the spring contact finger structure. Through the electro-thermal coupling analysis, it is found that the contact temperature rise of the contact finger decreases proportionally with the increase of the spring wire diameter, the number of spring coils, and the inclination angle of the single-coil spring, and the spring mid-diameter is too large or too small, which will increase the temperature rise of the contact finger, and the angle of the contact seat V-groove has a small influence on the temperature rise. Optimization results demonstrate that the selected spring finger structure parameters include a spring wire diameter (d) of 2 mm, a spring mid-diameter (Ф) of 133 mm, 147 coils (n) for the spring, a single-coil spring tilt angle (α) of 60°, and a contact seat V-groove angle (β) of 120°, resulting in a temperature rise of the finger of 47.57 K, indicating effective optimization.