Chemical dissolution of oxide layer on carbon steel SA 106 GR.B-based oxalic acid

The feeder pipes of the primary cooling system in a pressurized heavy water reactor (PHWR) are composed of carbon steel SA 106 GR.B. On the surface of this structural material, corrosion oxide layers including radionuclides are formed due to the presence of active species from water decomposition products caused by radiation, as well as the high temperature and high-pressure environment. These oxide layers decrease the heat transfer efficiency of the primary cooling system and pose a risk of radiation exposure to workers and the environment during maintenance and decommissioning, making effective decontamination essential. In this study, we simulated the formation of the corrosion oxide layer on the surface of carbon steel SA 106 GR.B, characterized the formed corrosion oxide layer, and investigated the dissolution characteristics of the corrosion oxide layer using oxalic acid (OA), a commercial chemical decontamination agent. The corrosion oxide layer formed has a thickness of approximately 4 µm and consists of hematite (Fe₂O₃) and magnetite (Fe₃O₄). The carbon steel coupons with formed oxide layers were dissolved in 10 mM and 20 mM OA solutions, resulting in iron ion concentrations of 220 ppm and 276 ppm in the OA respectively. In 10 mM and 20 mM OA, the corrosion depths of the coupons were 8.93 µm and 10.22 µm, with corrosion rates of 0.39 mg/cm²·h and 0.45 mg/cm²·h, respectively. Thus, this demonstrates that higher OA concentrations lead to increased dissolution and corrosion of steel.