Scholarlink

<p>In drilling processes, chips must be transported out of the borehole to free the work site from obstructions and evacuate process heat to prevent tool damage/breakage and thermal influences on the workpiece material. In vibration-assisted drilling (VAD), an axial tool oscillation superimposed on the continuous tool feed improves the chip transport by a kinematically enforced chip breakage. Nevertheless, especially for ductile and adhesive materials, clogging of the tool flute by subsequently generated chips is still a challenge. This study investigates the chip transport process in VAD under minimum quantity lubrication (MQL) using a coupled CFD–DEM simulation approach. The influence of process and chip properties as well as model parameters (here, the coefficients of friction and restitution) on the chip transport behavior within the tool flute have been analyzed. Experimental high-speed video analyses served to validate key model features and confirm overall trends. The simulation results reveal that chip velocity and transport behavior are strongly influenced by friction, drill rotation, and chip geometry. Higher velocities and chip rotation increase the risk of chip jamming in the flute. The coupled model and simulation results provide valuable insight into chip-flow interactions and support future tool and process design.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Metal chip transport through narrow twisted drill channels—Coupling of CFD and DEM

  • 期刊论文

  • 发表日期：

    2026年3月24日

查看全文
  • Teresa Tonn,
  • Lukas Schumski,
  • Jens Sölter,
  • Lizoel Buss,
  • Anne Geppert,
  • Bernhard Karpuschewski,
  • Udo Fritsching

摘要

In drilling processes, chips must be transported out of the borehole to free the work site from obstructions and evacuate process heat to prevent tool damage/breakage and thermal influences on the workpiece material. In vibration-assisted drilling (VAD), an axial tool oscillation superimposed on the continuous tool feed improves the chip transport by a kinematically enforced chip breakage. Nevertheless, especially for ductile and adhesive materials, clogging of the tool flute by subsequently generated chips is still a challenge. This study investigates the chip transport process in VAD under minimum quantity lubrication (MQL) using a coupled CFD–DEM simulation approach. The influence of process and chip properties as well as model parameters (here, the coefficients of friction and restitution) on the chip transport behavior within the tool flute have been analyzed. Experimental high-speed video analyses served to validate key model features and confirm overall trends. The simulation results reveal that chip velocity and transport behavior are strongly influenced by friction, drill rotation, and chip geometry. Higher velocities and chip rotation increase the risk of chip jamming in the flute. The coupled model and simulation results provide valuable insight into chip-flow interactions and support future tool and process design.