Effect of compact strip processing on segregation behavior and mechanical properties of Q&P steel

The microstructure and mechanical properties of the compact strip production (CSP) processed quenching and partitioning (Q&P) steels were investigated through experimental methods to address the challenge of designing high-performance Q&P steels. Compared with the conventional process (CP) produced samples, with slightly reduced strength, the total elongation of the CSP produced samples was increased by nearly 7%. Microstructural analysis revealed that variations in austenite stability were not the primary cause for the differences in mechanical properties between the CSP and the CP. The CSP processed Q&P steel exhibited milder center segregation behavior in contrast to the CP processed Q&P steel. Consequently, in the CSP processed Q&P steel, a higher proportion of austenite and a lower proportion of martensite were observed at the center position, delaying the crack initiation in the central region and contributing to the enhanced ductility. The investigation into the CSP process reveals its effect on alleviation of segregation and enhancement of mechanical properties of the Q&P steel.