Scholarlink

<p>The main cable is the primary load-bearing component of a suspension bridge, continuously exposed to harsh environmental conditions, such as wind and rain, throughout the year. These adverse conditions contribute to varying degrees of degradation and damage to the main cable, necessitating regular inspections to prevent catastrophic failures. Traditional manual inspection methods not only suffer from low efficiency but also pose significant safety risks to personnel. To address these challenges and ensure the safe and effective inspection of suspension bridge main cables, this study introduces a novel cooperative climbing robot, designated as Main Cable Robot Version II (CCRobot-M-II), inspired by the locomotion of the inchworm. The robot employs an alternating opening and closing mechanism of four gripper sets, mimicking the inchworm’s movement to achieve efficient crawling along the suspension bridge handrails. This paper provides a comprehensive analysis of the structural design, key components, and motion mechanisms of CCRobot-M-II. A detailed force analysis of the robot’s crawling process is also presented, followed by the design of the control system and the development of an efficient motion control algorithm. Laboratory experiments demonstrate that the robot achieves a positional error of 0–0.64% during crawling, with a maximum average crawling speed of 7.6&#xa0;m/min. Furthermore, the biomimetic design enables the robot to overcome obstacles up to 30&#xa0;mm in height and possess the capability to handle suspension bridge cables with spans ranging from 740 to 1100&#xa0;mm. Finally, CCRobot-M-II successfully conducted an inspection of the main cable on a suspension bridge, marking the world’s first successful deployment of a climbing robot for main cable inspection on a suspension bridge.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Design and Control of a Bionic Inspection Robot for Suspension Bridge Main Cables

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年12月19日

查看全文
  • Shengkai Liu,
  • Chao Wang,
  • Xiaoqiang Yuan,
  • Ning Ding

摘要

The main cable is the primary load-bearing component of a suspension bridge, continuously exposed to harsh environmental conditions, such as wind and rain, throughout the year. These adverse conditions contribute to varying degrees of degradation and damage to the main cable, necessitating regular inspections to prevent catastrophic failures. Traditional manual inspection methods not only suffer from low efficiency but also pose significant safety risks to personnel. To address these challenges and ensure the safe and effective inspection of suspension bridge main cables, this study introduces a novel cooperative climbing robot, designated as Main Cable Robot Version II (CCRobot-M-II), inspired by the locomotion of the inchworm. The robot employs an alternating opening and closing mechanism of four gripper sets, mimicking the inchworm’s movement to achieve efficient crawling along the suspension bridge handrails. This paper provides a comprehensive analysis of the structural design, key components, and motion mechanisms of CCRobot-M-II. A detailed force analysis of the robot’s crawling process is also presented, followed by the design of the control system and the development of an efficient motion control algorithm. Laboratory experiments demonstrate that the robot achieves a positional error of 0–0.64% during crawling, with a maximum average crawling speed of 7.6 m/min. Furthermore, the biomimetic design enables the robot to overcome obstacles up to 30 mm in height and possess the capability to handle suspension bridge cables with spans ranging from 740 to 1100 mm. Finally, CCRobot-M-II successfully conducted an inspection of the main cable on a suspension bridge, marking the world’s first successful deployment of a climbing robot for main cable inspection on a suspension bridge.