Scholarlink

<p>The development of structurally and functionally integrated microwave-absorbing (MA) composites represents a pivotal advancement in addressing the limitations of current MA materials for practical engineering applications. While traditional approaches predominantly rely on dielectric and magnetic loss materials, they often necessitate high filler loadings during fabrication. This conventional methodology fails to meet the increasingly stringent performance requirements for MA materials in national defense applications. Herein, a novel strategy of metasurface patterns based on poly (3,4-ethylenedioxythiophene): poly (4-styrenesulfonic acid sodium) conductive ink on the aramid unidirectional cloth (A<sub>UD</sub>C) was proposed by the optimal design of periodic unit structures through electromagnetic simulation. Then, a successfully developed metasurface microwave-absorbing composite (MSAC) exhibited excellent broadband absorption performance and high mechanical load-bearing capacity. The MA performance of MSAC in the range of 2 to 18&#xa0;GHz was tested by the bow frame method, and the effective absorption bandwidth was 8.9&#xa0;GHz (9.1 ~ 18.0&#xa0;GHz) at a thickness of 3.2&#xa0;mm. The measurement results were in good agreement with the simulation results. The results of the mechanical properties test indicated there were no significant differences between MSACs prepared with A<sub>UD</sub>C as the frequency-selective surface (FSS) patterned substrate and composites without FSS patterns. It has significant advantages over the MSAC prepared by using polyimide film as an FSS patterned substrate, and the interlayer shear strength increased by 159%. It is expected to bring major changes to the air, land, sea, and other defenses.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Integrated design and performance of microwave absorbing-mechanical load bearing: metasurface aramid unidirectional cloth composites based on PEDOT: PSS conductive ink

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月21日

查看全文
  • Qian Yang,
  • Jiaxu Sun,
  • Yi Gao,
  • Yongxi Lu,
  • Zihao Shen,
  • Li Ma,
  • Tian Yang,
  • Fanbin Meng

摘要

The development of structurally and functionally integrated microwave-absorbing (MA) composites represents a pivotal advancement in addressing the limitations of current MA materials for practical engineering applications. While traditional approaches predominantly rely on dielectric and magnetic loss materials, they often necessitate high filler loadings during fabrication. This conventional methodology fails to meet the increasingly stringent performance requirements for MA materials in national defense applications. Herein, a novel strategy of metasurface patterns based on poly (3,4-ethylenedioxythiophene): poly (4-styrenesulfonic acid sodium) conductive ink on the aramid unidirectional cloth (AUDC) was proposed by the optimal design of periodic unit structures through electromagnetic simulation. Then, a successfully developed metasurface microwave-absorbing composite (MSAC) exhibited excellent broadband absorption performance and high mechanical load-bearing capacity. The MA performance of MSAC in the range of 2 to 18 GHz was tested by the bow frame method, and the effective absorption bandwidth was 8.9 GHz (9.1 ~ 18.0 GHz) at a thickness of 3.2 mm. The measurement results were in good agreement with the simulation results. The results of the mechanical properties test indicated there were no significant differences between MSACs prepared with AUDC as the frequency-selective surface (FSS) patterned substrate and composites without FSS patterns. It has significant advantages over the MSAC prepared by using polyimide film as an FSS patterned substrate, and the interlayer shear strength increased by 159%. It is expected to bring major changes to the air, land, sea, and other defenses.