Scholarlink

<p>Natural stone industry generates large volumes of mineral waste, whose valorization in polymer composites through 3D printing remains limited. This study explores the feedstock properties, calibration, and mechanical performance of poly(lactic acid) (PLA) composites with limestone using screw-assisted material extrusion. Neat PLA and composite pellets were characterized by differential scanning calorimetry, rheometry, and Fourier-transform infrared spectroscopy. Thermal analysis indicated that limestone promoted heterogeneous nucleation at moderate filler loading, whereas excessive incorporation disrupted crystallization due to reduced chain mobility. Rheological analysis revealed shear-thinning behavior for all formulations, with viscosity increase with limestone addition at higher angular frequencies and suppressed terminal elastic response at high filler content. Fourier-transform infrared spectroscopy suggested minor structural changes without significant signs of compounding-related degradation. A three-stage calibration process on a retrofitted 3D printer established fused pellet fabrication (FPF) process conditions. Mechanical tests showed higher limestone content increased stiffness, reaching an elastic modulus up to 4.3 GPa for the composite containing 50 wt.% of limestone, while reducing ductility and strength, consistent with values reported for filament-based fused filament fabrication. Overall, this work demonstrates the feasibility of processing PLA/limestone composites via desktop-scale FPF and highlights the importance of formulation-specific calibration. The findings support the potential upcycling of mineral waste from the stone industry into value-added, eco-friendly materials for additive manufacturing.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Feedstock characterization and process calibration for fused pellet fabrication of PLA/limestone composites

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月17日

查看全文
  • Joaquim Manoel Justino Netto,
  • Dora Sousa,
  • Pedro Amaral,
  • Marco Leite

摘要

Natural stone industry generates large volumes of mineral waste, whose valorization in polymer composites through 3D printing remains limited. This study explores the feedstock properties, calibration, and mechanical performance of poly(lactic acid) (PLA) composites with limestone using screw-assisted material extrusion. Neat PLA and composite pellets were characterized by differential scanning calorimetry, rheometry, and Fourier-transform infrared spectroscopy. Thermal analysis indicated that limestone promoted heterogeneous nucleation at moderate filler loading, whereas excessive incorporation disrupted crystallization due to reduced chain mobility. Rheological analysis revealed shear-thinning behavior for all formulations, with viscosity increase with limestone addition at higher angular frequencies and suppressed terminal elastic response at high filler content. Fourier-transform infrared spectroscopy suggested minor structural changes without significant signs of compounding-related degradation. A three-stage calibration process on a retrofitted 3D printer established fused pellet fabrication (FPF) process conditions. Mechanical tests showed higher limestone content increased stiffness, reaching an elastic modulus up to 4.3 GPa for the composite containing 50 wt.% of limestone, while reducing ductility and strength, consistent with values reported for filament-based fused filament fabrication. Overall, this work demonstrates the feasibility of processing PLA/limestone composites via desktop-scale FPF and highlights the importance of formulation-specific calibration. The findings support the potential upcycling of mineral waste from the stone industry into value-added, eco-friendly materials for additive manufacturing.