Scholarlink

<p>Additively manufactured auxetics (structures exhibiting a negative Poisson’s ratio) offer a unique combination of enhanced mechanical strength and energy absorption. These properties can be further improved through strategic material placement and architectural design. This study investigates the feasibility of fabricating bi-material rotating-square auxetic structures composed of flexible and rigid constituents in their squares and hinges. Rotating-square auxetic structures are manufactured via material extrusion using rigid polylactic acid (PLA) and flexible thermoplastic polyurethane (TPU) to explore the effects of material distribution on mechanical performance and failure characteristics at the macro (<i>i.e.</i>, component) and meso (<i>i.e.</i>, cell) scales. Baseline tests are conducted to quantify single- and bi-material interfacial strength and failure modes under normal, shear, and combined loading conditions. Upon validation of interface integrity, single- and bi-material auxetic structures are fabricated and tested in uniaxial compression. Relative to the TPU single-material structure, the PLA square-TPU hinge&#xa0;structure provides a 33% increase in structural stiffness, increases energy absorption, delays the global densification strain by 10%, yields a structural Poisson’s ratio at least 0.3 lower than its single-material counterpart through global axial strains of 20%, and demonstrates partial shape recovery. Multiscale experimental analyses supplemented by a kinematic model reveal the rotation-dependent stiffening mechanisms of these structures, highlighting the benefits of flexible hinge materials. Bi-material structures with flexible hinges are shown to have bilinear trends in structural stiffness and energy absorption, not intrinsic to their single-material counterparts. These findings highlight the potential of bi-material design strategies in advancing the functionality and tunability of auxetic structures for the next generation of mechanical metamaterials.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Experimental characterization of nonlinear mechanical behavior and auxeticity in 3D-printed rotating-square auxetics with spatially variable materials

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月16日

查看全文
  • Tyler Paupst,
  • Nicholas Pagliocca,
  • George Youssef,
  • Thomas Kiel,
  • Paromita Nath,
  • Behrad Koohbor

摘要

Additively manufactured auxetics (structures exhibiting a negative Poisson’s ratio) offer a unique combination of enhanced mechanical strength and energy absorption. These properties can be further improved through strategic material placement and architectural design. This study investigates the feasibility of fabricating bi-material rotating-square auxetic structures composed of flexible and rigid constituents in their squares and hinges. Rotating-square auxetic structures are manufactured via material extrusion using rigid polylactic acid (PLA) and flexible thermoplastic polyurethane (TPU) to explore the effects of material distribution on mechanical performance and failure characteristics at the macro (i.e., component) and meso (i.e., cell) scales. Baseline tests are conducted to quantify single- and bi-material interfacial strength and failure modes under normal, shear, and combined loading conditions. Upon validation of interface integrity, single- and bi-material auxetic structures are fabricated and tested in uniaxial compression. Relative to the TPU single-material structure, the PLA square-TPU hinge structure provides a 33% increase in structural stiffness, increases energy absorption, delays the global densification strain by 10%, yields a structural Poisson’s ratio at least 0.3 lower than its single-material counterpart through global axial strains of 20%, and demonstrates partial shape recovery. Multiscale experimental analyses supplemented by a kinematic model reveal the rotation-dependent stiffening mechanisms of these structures, highlighting the benefits of flexible hinge materials. Bi-material structures with flexible hinges are shown to have bilinear trends in structural stiffness and energy absorption, not intrinsic to their single-material counterparts. These findings highlight the potential of bi-material design strategies in advancing the functionality and tunability of auxetic structures for the next generation of mechanical metamaterials.