Scholarlink

<p>Investigation results for some methods of obtaining longish deformed semi-finished products in the form of rods and wires from chips of aluminum alloys 6063 and AlSi12 excluding the melting process during their implementation are presented. The mechanical properties obtained from chips of experimental alloys of briquettes, rods, and wires were determined. The change in the structure of semi-finished products at all technological stages of processing was investigated. Computer simulation has been carried out, according to the results of which the regularities of temperature change, strain, and relative density in the volume of the deformation zone for semi-finished products were obtained by the method of combined rolling-extrusion of a porous billet from briquette chips of 6063 alloy. Experimental batches of products were obtained for various industrial purposes, including rods for modifying aluminum alloys.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Experimental Investigations on the Production of Alloying Rods from Recycled Waste of Aluminum Alloys at a Co-processing Unit

  • 期刊论文

  • 发表日期：

    2025年2月24日

查看全文
  • Sergey Borisovich Sidelnikov,
  • Yuri Nikolaevich Loginov,
  • Evgeniy Vladimirovich Ivanov,
  • Denis Sergeevich Voroshilov,
  • Ekaterina Sergeevna Lopatina,
  • Igor Lazarevich Konstantinov,
  • Yuriy Aleksandrovich Gorbunov,
  • Andrey Vasilyevich Parubok,
  • Dmitriy Igorevich Kuzin

摘要

Investigation results for some methods of obtaining longish deformed semi-finished products in the form of rods and wires from chips of aluminum alloys 6063 and AlSi12 excluding the melting process during their implementation are presented. The mechanical properties obtained from chips of experimental alloys of briquettes, rods, and wires were determined. The change in the structure of semi-finished products at all technological stages of processing was investigated. Computer simulation has been carried out, according to the results of which the regularities of temperature change, strain, and relative density in the volume of the deformation zone for semi-finished products were obtained by the method of combined rolling-extrusion of a porous billet from briquette chips of 6063 alloy. Experimental batches of products were obtained for various industrial purposes, including rods for modifying aluminum alloys.

Graphical Abstract