Scholarlink

<p>Fully stretchable hydrogel-based moisture-electric generators (FSHMEGs) are promising power sources for wearable and implantable electronics. Current FSHMEGs are constrained by low electrical output and mechanical fragility, mainly due to weak interfacial adhesiveness within multilayered architectures. Here, we introduce an intrinsically adhesive hydrogel that forms robust hydrogel-electrode interfaces, enabling efficient transfer of both electrical charges and mechanical loads during deformation. As a result, the device delivers an open-circuit voltage of 0.94&#xa0;V and a current density of 141 µA cm<sup>−2</sup> at 85% relative humidity, and maintains stable output for more than 220&#xa0;h. The reinforced interface also imparts exceptional mechanical durability, exhibiting only negligible performance degradation after 8000 folding cycles and 1000 stretching cycles at 80% strain. Benefiting from rapid humidity responsiveness and continuous power delivery, the device enables non-invasive respiration monitoring and can directly power wearable electronics (e.g., electrocardiogram (ECG) sensors). This interfacial-engineering strategy offers a practical pathway toward high-performance moisture-electric generators with broad potential in energy harvesting, bioelectronics, and self-powered sensing systems.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Interfacial Engineering for High-Output, Mechanically Robust Fully Stretchable Moisture-Electric Generators

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月21日

查看全文
  • Qi Meng,
  • He Zhang,
  • Jiayun Feng,
  • Minghan Yu,
  • Yuxin Sun,
  • Shujun Wang,
  • Yuxiang Sun,
  • Mingze Sun,
  • Jie Xu,
  • Haijiao Xie,
  • Qing Sun,
  • Yanhong Tian

摘要

Fully stretchable hydrogel-based moisture-electric generators (FSHMEGs) are promising power sources for wearable and implantable electronics. Current FSHMEGs are constrained by low electrical output and mechanical fragility, mainly due to weak interfacial adhesiveness within multilayered architectures. Here, we introduce an intrinsically adhesive hydrogel that forms robust hydrogel-electrode interfaces, enabling efficient transfer of both electrical charges and mechanical loads during deformation. As a result, the device delivers an open-circuit voltage of 0.94 V and a current density of 141 µA cm−2 at 85% relative humidity, and maintains stable output for more than 220 h. The reinforced interface also imparts exceptional mechanical durability, exhibiting only negligible performance degradation after 8000 folding cycles and 1000 stretching cycles at 80% strain. Benefiting from rapid humidity responsiveness and continuous power delivery, the device enables non-invasive respiration monitoring and can directly power wearable electronics (e.g., electrocardiogram (ECG) sensors). This interfacial-engineering strategy offers a practical pathway toward high-performance moisture-electric generators with broad potential in energy harvesting, bioelectronics, and self-powered sensing systems.