Molecule-Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery
摘要
The risk of flammability is an unavoidable issue for gel polymer electrolytes (GPEs). Usually, flame-retardant solvents are necessary to be used, but most of them would react with anode/cathode easily and cause serious interfacial instability, which is a big challenge for design and application of nonflammable GPEs. Here, a nonflammable GPE (SGPE) is developed by in situ polymerizing trifluoroethyl methacrylate (TFMA) monomers with flame-retardant triethyl phosphate (TEP) solvents and LiTFSI–LiDFOB dual lithium salts. TEP is strongly anchored to PTFMA matrix via polarity interaction between -P = O and -CH2CF3. It reduces free TEP molecules, which obviously mitigates interfacial reactions, and enhances flame-retardant performance of TEP surprisingly. Anchored TEP molecules are also inhibited in solvation of Li+, leading to anion-dominated solvation sheath, which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface layers. Such coordination structure changes Li+ transport from sluggish vehicular to fast structural transport, raising ionic conductivity to 1.03 mS cm−1 and transfer number to 0.41 at 30 °C. The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm−2, and 4.2 V LiCoO2|SGPE|Li battery delivers high average specific capacity > 120 mAh g−1 over 200 cycles. This study paves a new way to make nonflammable GPE that is compatible with Li metal anode.