Microstructure and mechanical properties of C/C composites/Ni superalloy dissimilar brazed joint for high-temperature applications

In this paper, the brazing of high-reliability C/C composite-metal joints for high-temperature application was studied. The surface of C/C composites was modified by the Cr metallization process and then brazed to Ni-based superalloy by AgPd braze. Alumina block was used as interlayer, and a zig-zag interfacial structure was constructed at the composites/braze interface. The results show that, after the metallization process, a strong adhesion reaction layer consisting of Cr carbides was coated on the C/C surface which in turn obviously improved the wettability of braze. The molted braze filled completely into the laser-machined holes in the C/C substrate and well-bonded interfaces and a homogeneous Ag(Pd) solution microstructure were obtained in the joint. The strength of the joint with C/C metalized at 1100 ℃ is higher than that of the joint with 1300 ℃. The joints exhibit very high bending strength of up to 82 MPa and shear strength of up to 54 MPa, respectively. The braze spikes increase the connection area and provide a strong pinning effect.