Scholarlink

<p>Nowadays, structural health monitoring (SHM) is one of the most critical subjects in geotechnical engineering. All structures (such as buildings and bridges) have a limited life span. Phenomena such as corrosion, fatigue, and excessive loading cause damage to these structures. The main goal of SHM is the timely detection of structural damages during or after a dynamic excitation to prevent destructive damage due to failure. The study investigates the effectiveness of wavelet transform techniques (discrete and continuous approach) as a signal processing-based method to monitor the condition of Pile–soil-superstructure systems. The primary objective is to identify defects in these systems under earthquake excitations. In this way, the first step determined the seismic response of a single pile embedded in one layer of Nevada sand using Abaqus finite element software. In the second step, the ability of acceleration signal processing recorded in different parts of the pile section has been evaluated to identify pile defects. In the present study, damage is not simulated in the finite element model. The yielding of the pile section under the earthquake record was considered a defect. In this context, the main goal is to detect yielding in the pile cross section using acceleration signal processing during earthquake excitations.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Signal Processing-Based Health Monitoring for Single Pile Embedded in Sand Under Earthquake Excitation Without Initial Defects

  • 期刊论文

  • 发表日期：

    2025年1月8日

查看全文
  • Navid Hasanpouri Notash,
  • Rouzbeh Dabiri,
  • Masoud Hajialilue Bonab,
  • Larissa Khodadadi,
  • Fariba Behrouz Sarand

摘要

Nowadays, structural health monitoring (SHM) is one of the most critical subjects in geotechnical engineering. All structures (such as buildings and bridges) have a limited life span. Phenomena such as corrosion, fatigue, and excessive loading cause damage to these structures. The main goal of SHM is the timely detection of structural damages during or after a dynamic excitation to prevent destructive damage due to failure. The study investigates the effectiveness of wavelet transform techniques (discrete and continuous approach) as a signal processing-based method to monitor the condition of Pile–soil-superstructure systems. The primary objective is to identify defects in these systems under earthquake excitations. In this way, the first step determined the seismic response of a single pile embedded in one layer of Nevada sand using Abaqus finite element software. In the second step, the ability of acceleration signal processing recorded in different parts of the pile section has been evaluated to identify pile defects. In the present study, damage is not simulated in the finite element model. The yielding of the pile section under the earthquake record was considered a defect. In this context, the main goal is to detect yielding in the pile cross section using acceleration signal processing during earthquake excitations.