Scholarlink

<p>In the pursuit of increasing the sintering temperature of multi-layer ceramic capacitors (MLCCs) of the metal electrode layer, this study examines the effect of secondary metal additives on the sintering behavior of nickel (Ni) nanoparticles. Traditionally, the discrepancy in sintering temperatures between metal and dielectric particles poses a challenge in MLCC fabrication, often resulting in uneven layer formation and device shortage. We introduced 0.1 atomic percent of tin (Sn), antimony (Sb), and cobalt (Co) into Ni nanoparticles and investigated their influence on sintering temperatures in the metal layer. Utilizing in-situ stress analysis and field emission scanning electron microscope (FE-SEM) imaging, we found that Sn and Sb effectively hindered the onset of neck formation and coalescence by forming intermetallic phases, whereas Co showed no such effect. These findings suggest that the strategic addition of specific secondary metals can shift the sintering behavior initiation of Ni related to the structural integrity during the MLCC fabrication and the performance of MLCCs. The research highlights the potential of using secondary metal additives to refine the thermal processing steps in electronic component manufacturing, aiming for more reliable and efficient devices.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

In-situ Stress Analysis of Nickel Nanoparticle Sintering with Metal Additive in Multi-Layer Ceramic Capacitors

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年3月8日

查看全文
  • Youngran Jung,
  • Wonhyo Joo,
  • Kyung Rul Lee,
  • Cheol Kim,
  • Min-Jung Choi,
  • Young-Chang Joo,
  • So-Yeon Lee

摘要

In the pursuit of increasing the sintering temperature of multi-layer ceramic capacitors (MLCCs) of the metal electrode layer, this study examines the effect of secondary metal additives on the sintering behavior of nickel (Ni) nanoparticles. Traditionally, the discrepancy in sintering temperatures between metal and dielectric particles poses a challenge in MLCC fabrication, often resulting in uneven layer formation and device shortage. We introduced 0.1 atomic percent of tin (Sn), antimony (Sb), and cobalt (Co) into Ni nanoparticles and investigated their influence on sintering temperatures in the metal layer. Utilizing in-situ stress analysis and field emission scanning electron microscope (FE-SEM) imaging, we found that Sn and Sb effectively hindered the onset of neck formation and coalescence by forming intermetallic phases, whereas Co showed no such effect. These findings suggest that the strategic addition of specific secondary metals can shift the sintering behavior initiation of Ni related to the structural integrity during the MLCC fabrication and the performance of MLCCs. The research highlights the potential of using secondary metal additives to refine the thermal processing steps in electronic component manufacturing, aiming for more reliable and efficient devices.