Scholarlink

<p>This paper presents a new voltage-controlled sinusoidal oscillator employing only two commercially available LT1228 integrated circuits, four resistors, and two capacitors. The proposed oscillator provides independent control of oscillation frequency and oscillation condition, as well as adjustable output amplitude, while maintaining low output impedance without requiring additional active components. The oscillation frequency is electronically and linearly tuned via the LT1228 bias current or control voltage. Experimental results confirm the practicality of the design: The proposed VCO achieves a wide linear tuning range from 9.25&#xa0;kHz to 837.2&#xa0;kHz, THD below 2.55%, and phase noise of –73.35 dBc/Hz at a 1&#xa0;kHz offset for a 237.8&#xa0;kHz carrier. The amplitude of the sinusoidal output is adjustable from 0.48 Vp-p to 6.64 Vp-p. In addition, the proposed VCO is successfully applied to FM and FSK modulation for low-frequency signal transmission, and the FM demodulation test yields a recovered sawtooth signal with an SNR of 34.51&#xa0;dB. Compared with existing LT1228-based oscillators, the proposed circuit achieves 25% lower power consumption (149 mW) and reduces the number of ICs required while improving functional versatility. These results validate the effectiveness and novelty of the proposed LT1228-based design.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Voltage-Controlled Sinusoidal Oscillator Using Commercially Available ICs with Amplitude Adjustability and Its Application to FM and FSK Modulations for Transmission and Processing of Identified Low-Frequency Signals

  • 期刊论文

  • 发表日期：

    2025年12月26日

查看全文
  • Peerawut Suwanjan,
  • Suchin Adhan,
  • Amornchai Chaichana,
  • Roman Sotner,
  • Wichai Nramat,
  • Winai Jaikla

摘要

This paper presents a new voltage-controlled sinusoidal oscillator employing only two commercially available LT1228 integrated circuits, four resistors, and two capacitors. The proposed oscillator provides independent control of oscillation frequency and oscillation condition, as well as adjustable output amplitude, while maintaining low output impedance without requiring additional active components. The oscillation frequency is electronically and linearly tuned via the LT1228 bias current or control voltage. Experimental results confirm the practicality of the design: The proposed VCO achieves a wide linear tuning range from 9.25 kHz to 837.2 kHz, THD below 2.55%, and phase noise of –73.35 dBc/Hz at a 1 kHz offset for a 237.8 kHz carrier. The amplitude of the sinusoidal output is adjustable from 0.48 Vp-p to 6.64 Vp-p. In addition, the proposed VCO is successfully applied to FM and FSK modulation for low-frequency signal transmission, and the FM demodulation test yields a recovered sawtooth signal with an SNR of 34.51 dB. Compared with existing LT1228-based oscillators, the proposed circuit achieves 25% lower power consumption (149 mW) and reduces the number of ICs required while improving functional versatility. These results validate the effectiveness and novelty of the proposed LT1228-based design.