<p>This study presents a novel approach for the growth time optimization of self-supported ZnO nano-/microstructures (ZnO NMs) on zinc foil surfaces using a biocompatible hydrothermal method. This fabrication technique aims to enhance the photocatalytic performance of ZnO nanostructures for efficient treatment of textile industry wastewater. The ZnO NMs were synthesized by immersing zinc (Zn) metal foils in pure water and heating them to 95&#xa0;°C, resulting in varying dimensional characteristics of nanorods through adjustments in hydrothermal growth time. Photodegradation experiments were conducted using rhodamine B (RB) dye and batik industry wastewater (BW). The photocatalyst demonstrated up to 95% degradation of RB within 150&#xa0;min under UV irradiation for the sample subjected to 16&#xa0;h of hydrothermal treatment. Additionally, this sample achieved complete degradation of color compounds in BW within 180&#xa0;min. However, repeated cycles revealed a decline in efficiency, highlighting challenges in maintaining consistent performance. This research underscores the eco-friendly and scalable potential of ZnO nanostructures in industrial wastewater treatment, paving the way for advancements in green technology.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Growth Time Optimization of ZnO Nano-microstructures on Zinc Foil for Enhanced Photocatalytic Treatment of Textile Wastewater

  • Nurfina Yudasari,
  • Kirana Y. Putri,
  • Iyon T. Sugiarto,
  • Ahmad Taufiq,
  • Dong-Hyun Kim,
  • Dede Djuhana

摘要

This study presents a novel approach for the growth time optimization of self-supported ZnO nano-/microstructures (ZnO NMs) on zinc foil surfaces using a biocompatible hydrothermal method. This fabrication technique aims to enhance the photocatalytic performance of ZnO nanostructures for efficient treatment of textile industry wastewater. The ZnO NMs were synthesized by immersing zinc (Zn) metal foils in pure water and heating them to 95 °C, resulting in varying dimensional characteristics of nanorods through adjustments in hydrothermal growth time. Photodegradation experiments were conducted using rhodamine B (RB) dye and batik industry wastewater (BW). The photocatalyst demonstrated up to 95% degradation of RB within 150 min under UV irradiation for the sample subjected to 16 h of hydrothermal treatment. Additionally, this sample achieved complete degradation of color compounds in BW within 180 min. However, repeated cycles revealed a decline in efficiency, highlighting challenges in maintaining consistent performance. This research underscores the eco-friendly and scalable potential of ZnO nanostructures in industrial wastewater treatment, paving the way for advancements in green technology.