Flapping-wing energy harvesting experiences with modified time variations at high re-number

Wind-energy converters with rotating blades are most common for energy harvesting. In special cases a system of flapping wings may be of interest where the wings are oscillating in combined pitching and flapping (plunging) modes respectively. Then the ratio of pitching and plunging amplitudes is of main concern: If the amplitude of the pitching motion exceeds the amplitude of the induced angle of the plunging motion, energy transfer from the oncoming flow is present. To accomplish maximum energy transfers and maximum efficiencies a considerable number of parameters have to be varied. Most of the published investigations assume harmonic time variations of both pitching and plunging motion. In the present paper the time variation will be modified such that the stroke reversal times are favorably be influenced, i.e., the fraction of the period where the airfoil changes the angle of attack from its maximum to its minimum or vice versa. In the present paper this variation is represented by an analytical function. Further, the phase between pitch and plunge motion and the time dependent deformation of the airfoil-leading edge will be investigated. It will be shown that the different variations and modifications will lead to considerable increases of power transfer and efficiency.