Scholarlink

<p>This study investigates the key factors influencing the emulsification of oil-water emulsions in alkali-surfactant-polymer (ASP) flooding wells using a high-pressure electric field separation approach. The research examines how oil-water emulsions respond to demulsification under high-voltage conditions and identifies the challenges associated with emulsion separation in oilfield operations. These findings provide valuable technical insights for optimizing the treatment of produced wastewater in oilfields. The results indicate that when sodium chloride concentrations exceed 3000&#xa0;mg/L, the efficiency of electroseparation declines. Furthermore, introducing nanoparticles extends the time required for emulsion separation under an electric field. A critical threshold is identified when nano-ferrous sulfide concentrations surpass 0.05% and sodium chloride levels exceed 1600&#xa0;mg/L, marking the limit for effective electroseparation. Additionally, an increase in colloid and asphaltene content negatively impacts the separation process. However, hydrolyzed polyacrylamide (HPAM) and heavy alkylbenzene sulfonate (HABS) exhibit a relatively small influence on the electroseparation efficiency of the emulsion.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigation of liquid-electric separation properties following acidification in alkali-surfactant-polymer flooding

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月21日

查看全文
  • Dongju Li,
  • Guohua Wang,
  • Shumin Lou,
  • Jian Sun,
  • Xuenan Xu

摘要

This study investigates the key factors influencing the emulsification of oil-water emulsions in alkali-surfactant-polymer (ASP) flooding wells using a high-pressure electric field separation approach. The research examines how oil-water emulsions respond to demulsification under high-voltage conditions and identifies the challenges associated with emulsion separation in oilfield operations. These findings provide valuable technical insights for optimizing the treatment of produced wastewater in oilfields. The results indicate that when sodium chloride concentrations exceed 3000 mg/L, the efficiency of electroseparation declines. Furthermore, introducing nanoparticles extends the time required for emulsion separation under an electric field. A critical threshold is identified when nano-ferrous sulfide concentrations surpass 0.05% and sodium chloride levels exceed 1600 mg/L, marking the limit for effective electroseparation. Additionally, an increase in colloid and asphaltene content negatively impacts the separation process. However, hydrolyzed polyacrylamide (HPAM) and heavy alkylbenzene sulfonate (HABS) exhibit a relatively small influence on the electroseparation efficiency of the emulsion.