Microstructure and Corrosion Resistance of Cu/Ni Composite Coating Fabricated by Cold Spray

Cold spraying methods are used to prepare Cu/Ni composite coating on Q235 substrates. The porosity, micromorphology, and microhardness and corrosion properties of the copper coating prepared by cold spraying are studied. This experiment mainly explores the microstructure and corrosion resistance of Cu/Ni composite coatings prepared by different composition powder ratios. The heat treatment process of the coating was carried out to explore the effect of the heat treatment process on the microstructure and corrosion resistance of the coating. The results indicated that the porosity of the coating increases slightly with an increase in nickel powder content. The metal nickel plays an anodic protection role in the Cu/Ni battery. However, too much nickel will lead to too much anode material, and the overall structure of the coating will be destroyed after anode corrosion. The composite coating prepared with 40 wt% nickel powder has the best corrosion resistance. After heat treatment, the corrosion resistance of copper/nickel composite coatings is reduced, and the quality of the coatings is improved.