Purpose <p>Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime.</p> Methods <p>The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences.</p> Results <p>Plastic and paper rich feedstocks crumbled to a nominal 2&#xa0;mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2&#xa0;mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4&#xa0;mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4&#xa0;mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials.</p> Conclusions <p>This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.</p> Graphical Abstract <p></p>