Scholarlink

<p>Real-time detection of acetic acid vapor is of concern for ensuring environmental and personal safety. However, acetic acid gas sensors, particularly those based on Bi<sub>2</sub>O<sub>3</sub>, often fail to meet practical performance requirements owing to their slow response characteristics and high operating temperature. To enhance sensing performance, highly permeable Bi<sub>2</sub>O<sub>3</sub> microspheres decorated by Pt-nanoparticles are rationally synthesized by a facile template method. Among the fabricated sensors, the one based on 3 wt% Pt-decorated Bi<sub>2</sub>O<sub>3</sub> demonstrated excellent sensing performance. Specifically, the sensor displayed high selectivity for acetic acid, rapid response and recovery times (22.5 and 9 s, respectively), strong resistance to interference, and good long-term stability at a low operating temperature (150 °C). Notably, the sensor exhibited an exceptionally high response of 126 to 100 ppm acetic acid—the highest reported value for Bi<sub>2</sub>O<sub>3</sub>-based sensors tested at a relatively low operating temperature in recent years. These results demonstrate that Pt-decorated Bi<sub>2</sub>O<sub>3</sub> holds strong potential for use in high-performance acetic acid sensors.</p> Graphical abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Structural design of highly permeable Bi2O3 microspheres decorated by Pt-nanoparticles: facile synthesis and acetic acid sensing performance

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年7月10日

查看全文
  • Fan Yang,
  • Jun-Ning Zhang,
  • Chao Zhang,
  • Xin-Da Xu,
  • Bing Li,
  • Woochul Yang,
  • Wan-Feng Xie

摘要

Real-time detection of acetic acid vapor is of concern for ensuring environmental and personal safety. However, acetic acid gas sensors, particularly those based on Bi2O3, often fail to meet practical performance requirements owing to their slow response characteristics and high operating temperature. To enhance sensing performance, highly permeable Bi2O3 microspheres decorated by Pt-nanoparticles are rationally synthesized by a facile template method. Among the fabricated sensors, the one based on 3 wt% Pt-decorated Bi2O3 demonstrated excellent sensing performance. Specifically, the sensor displayed high selectivity for acetic acid, rapid response and recovery times (22.5 and 9 s, respectively), strong resistance to interference, and good long-term stability at a low operating temperature (150 °C). Notably, the sensor exhibited an exceptionally high response of 126 to 100 ppm acetic acid—the highest reported value for Bi2O3-based sensors tested at a relatively low operating temperature in recent years. These results demonstrate that Pt-decorated Bi2O3 holds strong potential for use in high-performance acetic acid sensors.

Graphical abstract