Scholarlink

<p>To analyze the temperature effect-related failure behavior and estimate the fatigue life of forged superalloy, high- and very-high-cycle fatigue experiments were performed. The microstructural characteristics, failure modes, and crack growth behavior are characterized by two- &amp; three-dimensional microscopy techniques, along with electron-backscatter-diffraction (EBSD) analysis. The fractographic analysis demonstrated that surface failure at both 25&#xa0;°C and 650&#xa0;°C is attributed to surface flaws, whereas subsurface and internal failures are primarily driven by faceted cracking, often facilitated by inclusions or pores at 25&#xa0;°C, and solely assisted by large grains at 650&#xa0;°C. EBSD analysis revealed that crack propagation occurs in a transgranular manner, leading to the formation of facets; however, it is impeded by a complex structure comprised of high-angle grain boundaries and twin boundaries. In addition, under the influence of both temperatures, the threshold values for small as well as long cracks are elucidated. Finally, a fatigue life assessment approach that accounts for primary defects and different temperatures is established, and the prediction results demonstrate a closer alignment with the experimental data.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Temperature Effect-Related High and Very High Cycle Fatigue Failure Analysis and Life Estimation of Forged Superalloy

  • 期刊论文

  • 发表日期：

    2025年2月14日

查看全文
  • M. I. Lashari,
  • W. Li,
  • Z. F. Hu,
  • C. Li,
  • X. B. Cao,
  • Y. Z. Jin

摘要

To analyze the temperature effect-related failure behavior and estimate the fatigue life of forged superalloy, high- and very-high-cycle fatigue experiments were performed. The microstructural characteristics, failure modes, and crack growth behavior are characterized by two- & three-dimensional microscopy techniques, along with electron-backscatter-diffraction (EBSD) analysis. The fractographic analysis demonstrated that surface failure at both 25 °C and 650 °C is attributed to surface flaws, whereas subsurface and internal failures are primarily driven by faceted cracking, often facilitated by inclusions or pores at 25 °C, and solely assisted by large grains at 650 °C. EBSD analysis revealed that crack propagation occurs in a transgranular manner, leading to the formation of facets; however, it is impeded by a complex structure comprised of high-angle grain boundaries and twin boundaries. In addition, under the influence of both temperatures, the threshold values for small as well as long cracks are elucidated. Finally, a fatigue life assessment approach that accounts for primary defects and different temperatures is established, and the prediction results demonstrate a closer alignment with the experimental data.

Graphical Abstract