Scholarlink

<p>Incorporating nanofillers into natural fiber-reinforced polymer composites (NFRPCs) can be a promising strategy for enhancing their mechanical performance and expanding their applicability in different industrial sectors. This study examines the influence of nanodiamond (ND) reinforcement on the mechanical properties of flax fabric-reinforced epoxy composites (FFRECs). Three laminates were produced: an unfilled composite (F6) and two ND-modified variants containing 0.3 wt.% and 0.6 wt.% NDs. Tensile, flexural, interlaminar shear strength (ILSS), and low-velocity impact tests were conducted. ND addition improved the measured mechanical properties, with the 0.6 wt.% ND composite showing the greatest enhancement. Tensile strength and Young’s modulus increased from 43 MPa and 2.44 GPa for (F6) composite laminate to 55.5 MPa and 3.2 GPa for the one containing 0.6 wt.% NDs. Flexural strength and modulus increased from 61.7 MPa and 2.4 GPa to 70 MPa and 3.06 GPa, while ILSS was improved by 18.5%. These results confirm that ND dispersion can be employed to tailor the mechanical properties of FFRECs.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Nanodiamond Dispersion on the Mechanical Performance of Flax Fabric-Reinforced Epoxy Nanocomposites

  • 期刊论文

  • 发表日期：

    2026年6月19日

查看全文
  • Osama M. Mabrouk,
  • Abdelrahman Zkria Ahmed,
  • Shigeki Yashiro,
  • Sota Onodera,
  • Wael Khair-Eldeen,
  • Ahmed H. Hassanin,
  • Mohsen A. Hassan

摘要

Incorporating nanofillers into natural fiber-reinforced polymer composites (NFRPCs) can be a promising strategy for enhancing their mechanical performance and expanding their applicability in different industrial sectors. This study examines the influence of nanodiamond (ND) reinforcement on the mechanical properties of flax fabric-reinforced epoxy composites (FFRECs). Three laminates were produced: an unfilled composite (F6) and two ND-modified variants containing 0.3 wt.% and 0.6 wt.% NDs. Tensile, flexural, interlaminar shear strength (ILSS), and low-velocity impact tests were conducted. ND addition improved the measured mechanical properties, with the 0.6 wt.% ND composite showing the greatest enhancement. Tensile strength and Young’s modulus increased from 43 MPa and 2.44 GPa for (F6) composite laminate to 55.5 MPa and 3.2 GPa for the one containing 0.6 wt.% NDs. Flexural strength and modulus increased from 61.7 MPa and 2.4 GPa to 70 MPa and 3.06 GPa, while ILSS was improved by 18.5%. These results confirm that ND dispersion can be employed to tailor the mechanical properties of FFRECs.