Scholarlink

<p>Triboelectric nanogenerator (TENG) is a promising energy harvesting device for harvesting renewable mechanical energy. Some materials used in triboelectric nanogenerator inevitably pollute the environment, so the development of green triboelectric materials has attracted widespread attention. Herein, we chose a non-toxic sodium carboxymethyl cellulose (CMC), which has poor tribopositive properties due to the carboxymethyl group contained in it. Thus, the tribopositive polarity of CMC is enhanced by doping hydroxy-rich polyvinyl alcohol (PVA) with strong electron-donating ability. Rough and porous CMC/PVA polymer blend films with strong tribopositive polarity and environmental friendliness were prepared by a simple physical blending strategy. The open-circuit voltage (<i>V</i><sub>OC</sub>) and short-circuit current (<i>I</i><sub>SC</sub>) were optimized to be 380&#xa0;V and 49&#xa0;µA, respectively, for a CMC/PVA mass ratio of 10:3, and the maximum power density of CMC/PVA-TENG was 1.32&#xa0;mW/cm<sup>2</sup>. This study provides a feasible approach for enhancing the tribopositive properties of materials by doping modification and the development of green triboelectric nanogenerators.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhancing the Output Performance of Green Cellulose-Based Triboelectric Nanogenerator by Doping with Polyvinyl Alcohol

  • 期刊论文

  • 发表日期：

    2025年2月1日

查看全文
  • Mengnan Qu,
  • Yuan Deng,
  • Hui Liu,
  • Yuqing Wang,
  • Cai-Li Sun,
  • Jinmei He

摘要

Triboelectric nanogenerator (TENG) is a promising energy harvesting device for harvesting renewable mechanical energy. Some materials used in triboelectric nanogenerator inevitably pollute the environment, so the development of green triboelectric materials has attracted widespread attention. Herein, we chose a non-toxic sodium carboxymethyl cellulose (CMC), which has poor tribopositive properties due to the carboxymethyl group contained in it. Thus, the tribopositive polarity of CMC is enhanced by doping hydroxy-rich polyvinyl alcohol (PVA) with strong electron-donating ability. Rough and porous CMC/PVA polymer blend films with strong tribopositive polarity and environmental friendliness were prepared by a simple physical blending strategy. The open-circuit voltage (VOC) and short-circuit current (ISC) were optimized to be 380 V and 49 µA, respectively, for a CMC/PVA mass ratio of 10:3, and the maximum power density of CMC/PVA-TENG was 1.32 mW/cm2. This study provides a feasible approach for enhancing the tribopositive properties of materials by doping modification and the development of green triboelectric nanogenerators.