Experimental and numerical investigations of steel coped beam using DIC method

Steel-coped beams are used in industrial structures to accommodate a cluster of water mains, fire hydrants, power cables and telecommunication wires. The coped regions restrict the ultimate capacity and cause unfavorable failure modes. The current study investigates the structural assessment of the coped section in offshore topsides while their use enhances operational safety for drilling and production. The structural evaluation is done through 2D digital image correlation (DIC) experiments to quantify the influence of various cope geometries. The DIC technique illustrated the strain and deformation measurements under different loading conditions for different coped geometry. The primary failure mode observed in local web buckling is characterized by noticeable lateral displacement and the development of buckling lines over the coped web. Studies showed the influence of the cope depth on the load-carrying capacity and buckling processes for different cope geometries. The results of the DIC analysis are strongly aligned with experimental data and finite element numerical results, suggesting this technique to the structural assessment of coped section.