Intermittent data communication loss resistant state feedback wide area damping controller for interconnected power system

This article aims at designing a robust wide-area damping controller (WADC) to address the problems associated with communication failures. The proposed controller is a state feedback-based controller, which uses generators’ states as the controller inputs. The structure of the proposed controller’s feedback gain matrix is a combination of two feedback gain matrices to achieve adequate robust performance over different disturbances and communication losses. These two feedback gain matrices are; full-scale feedback gain matrix and decentralized scale feedback gain matrix. Both models are designed by considering all generators’ states are available at the controller input side. However, both matrices’ structures are different from each other. The conventional LQR state feedback control technique is used to design the full-scale matrix. On the other hand, the decentralized scale matrix is computed using a structurally constrained \(H_2\) $H_2$ -norm optimization technique to acquire the required structure. The full-scale model gives robust performance under different faults. Whereas, the decentralized scale matrix will result robust performance against communication failures. Therefore, to achieve superior performance under all conditions, the proposed controller can be used. To show the efficacy of the proposed controller, it is compared with different existing controllers and the results are illustrated. Simulation studies are conducted on well-known IEEE 39-bus and 68-bus test systems to validate the robustness of the proposed controller considering different faults and communication failures.