Scholarlink

<p>In this work, the morphology and fractal properties of Zn–Mg and Zn–Mg–Cu nanocomposites were investigated. Zn–Mg–Cu nanocomposites with 2, 3 and 4% by weight of Cu were prepared by electrochemical method on FTO glass substrate and compared with Zn–Mg nanocomposite. The surface properties of the nanocomposites were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). SEM images confirm that the morphology and grain size depend on the amount of Cu doping. The grain size decreases with increasing Cu concentration. Statistical analysis based on 3D AFM images showed that surface roughness (<i>S</i><sub>q</sub>) and fractal dimension (<i>D</i><sub>f</sub>) decreased with increasing Cu concentration. <i>D</i><sub>f</sub> obtained using the log(count) vs. log(box size) curve showed that <i>D</i><sub>f</sub> is independent of scan size and pixel resolution. The <i>D</i><sub>f</sub> values of ZM3, ZM3C2, ZM3C3 and ZM3C4 were calculated to be 2.48, 2.44, 2.36 and 2.30, respectively. It can be concluded that the lacunarity coefficient <i>β</i> of all the nanocomposites has a high degree of surface microstructure homogeneity with <i>β</i> &lt; 0.07. Multifractal behaviour was observed for all nanocomposites, with the multifractal degree of Zn–Mg–Cu nanocomposites being reduced compared to that of Zn–Mg nanocomposites.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Cu content on the fractal and multifractal properties of Zn–Mg–Cu composites

  • 期刊论文

  • 发表日期：

    2025年2月19日

查看全文
  • Maryam Gholizadeh Arashti

摘要

In this work, the morphology and fractal properties of Zn–Mg and Zn–Mg–Cu nanocomposites were investigated. Zn–Mg–Cu nanocomposites with 2, 3 and 4% by weight of Cu were prepared by electrochemical method on FTO glass substrate and compared with Zn–Mg nanocomposite. The surface properties of the nanocomposites were studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). SEM images confirm that the morphology and grain size depend on the amount of Cu doping. The grain size decreases with increasing Cu concentration. Statistical analysis based on 3D AFM images showed that surface roughness (Sq) and fractal dimension (Df) decreased with increasing Cu concentration. Df obtained using the log(count) vs. log(box size) curve showed that Df is independent of scan size and pixel resolution. The Df values of ZM3, ZM3C2, ZM3C3 and ZM3C4 were calculated to be 2.48, 2.44, 2.36 and 2.30, respectively. It can be concluded that the lacunarity coefficient β of all the nanocomposites has a high degree of surface microstructure homogeneity with β < 0.07. Multifractal behaviour was observed for all nanocomposites, with the multifractal degree of Zn–Mg–Cu nanocomposites being reduced compared to that of Zn–Mg nanocomposites.