Scholarlink

<p> Tungsten oxide (WO<sub>3</sub>) has recently gained attention as an electrochromic material for dynamic display technologies, particularly advertising, due to its tunable optical and electrochemical properties. In this study, we compared WO<sub>3</sub> with titanium dioxide (TiO<sub>2</sub>) coatings and commercial display films. WO<sub>3</sub> layers with thicknesses of 2, 4, and 6 nm were fabricated using a surfactant-assisted spray pyrolytic method to ensure uniformity and adhesion. TiO<sub>2</sub> coatings served as controls. To confirm the monoclinic phase of WO<sub>3</sub>, X-ray diffraction was performed. Optical performance was assessed through UV–Vis–NIR transmission and reflection spectra, while electrochemical behaviour was measured using cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. Durability testing included monitoring transmission and charge insertion/extraction over cycling, alongside environmental stability assessments. An economic evaluation compared Material and operational costs.&#xa0;At 6 nm, TiO<sub>2</sub> films achieved a sharpness score of 70, 75% contrast&#xa0;and 80% colour purity, with transmittance of 55% and colouration efficiency of 0.65 cm<sup>2</sup>/C. Their switching time was 15 s, and performance degraded significantly after extended cycling, including delamination beyond 50,000 cycles. By contrast, WO<sub>3</sub> films showed higher transmittance (70%), faster switching (12 s), and better colouration efficiency (0.75 cm<sup>2</sup>/C). They also exhibited more stable charge density retention, improved ion mobility, and stronger current responses in voltammetry.&#xa0;Overall, WO<sub>3</sub> films demonstrated superior optical clarity, faster response, and better durability compared to TiO<sub>2</sub>. These findings suggests&#xa0;that&#xa0;WO<sub>3</sub> is a promising, cost-effective material for next-generation electrochromic displays in advertising applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Application and visual performance of tungsten oxide in advertising design

  • 期刊论文

  • 发表日期：

    2025年10月13日

查看全文
  • Luo Weimin,
  • Zheng Yupu

摘要

Tungsten oxide (WO3) has recently gained attention as an electrochromic material for dynamic display technologies, particularly advertising, due to its tunable optical and electrochemical properties. In this study, we compared WO3 with titanium dioxide (TiO2) coatings and commercial display films. WO3 layers with thicknesses of 2, 4, and 6 nm were fabricated using a surfactant-assisted spray pyrolytic method to ensure uniformity and adhesion. TiO2 coatings served as controls. To confirm the monoclinic phase of WO3, X-ray diffraction was performed. Optical performance was assessed through UV–Vis–NIR transmission and reflection spectra, while electrochemical behaviour was measured using cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. Durability testing included monitoring transmission and charge insertion/extraction over cycling, alongside environmental stability assessments. An economic evaluation compared Material and operational costs. At 6 nm, TiO2 films achieved a sharpness score of 70, 75% contrast and 80% colour purity, with transmittance of 55% and colouration efficiency of 0.65 cm2/C. Their switching time was 15 s, and performance degraded significantly after extended cycling, including delamination beyond 50,000 cycles. By contrast, WO3 films showed higher transmittance (70%), faster switching (12 s), and better colouration efficiency (0.75 cm2/C). They also exhibited more stable charge density retention, improved ion mobility, and stronger current responses in voltammetry. Overall, WO3 films demonstrated superior optical clarity, faster response, and better durability compared to TiO2. These findings suggests that WO3 is a promising, cost-effective material for next-generation electrochromic displays in advertising applications.