Study of synergistic nanostructures of NiO/ZnO and their composite as high-performance electrodes for supercapacitor

Supercapacitors’ high power density and extended life cycle have drawn a lot of interest in energy storage devices. In this study, different nanostructures of nickel oxide (NiO) and zinc oxide (ZnO) were synthesized using the hydrothermal method by treating the corresponding metal precursors in a high-temperature aqueous solution. The XRD and SEM were used to analyse crystal structure and morphology, respectively. The absorption of ZnO and NiO materials is found to be in the visible range of 300–400 and 200–300 nm, respectively. The band gap of ZnO was calculated as 3.04 eV, while that of NiO was 3.93 eV. The supercapacitor electrode was fabricated on nickel foam with developed nanostructure and carbon materials. The composite ZnO and NiO materials showed an increase in capacitance compared to the bare NiO and ZnO electrodes. This enhancement could be related to improved charge transfer kinetics and increased surface area for electrolyte interaction. Galvanostatic charge–discharge, cyclic voltammetry and electrochemical impedance spectroscopy measurements were conducted to assess the electrochemical efficiency of nanomaterials and their composites. At the current density of 2 A g⁻¹, the specific capacitance of the NiO/ZnO composite is found to be 351.54 F g⁻¹, which is ~2 times of the bare NiO and ~3.34 times of bare ZnO. The maximum energy density of ZnO nanoparticles, NiO nanoflakes and the composite are found to be 3.96, 6.58 and 13.90 Wh kg^-1, respectively. The charge storage process is the result of diffusion and redox reactions. This paper explores a binary oxide composites method for creating efficient supercapacitor electrode materials.