Scholarlink

<p>Titanium oxide (TiO<sub>2</sub>) nanotubes produced on titanium (Ti) alloys by electrochemical anodic synthesis are used in biomedical and energy applications. Synthesis of these nanotubes involves fluoride ions, which travel in the electrolyte and reach the anodic Ti. Stirring of the electrolyte pushes the fluoride ions to move toward the anode and participate in oxidation. In this research work, anodic TiO<sub>2</sub> was produced on Ti using 0.5 wt.% NH<sub>4</sub>F containing glycerol electrolyte (100&#xa0;ml) for 20 and 30&#xa0;V with the electrolyte being stirred by a magnetic pellet. Oxidation was done for 0.5 and 1&#xa0;h at 20&#xa0;V and 30&#xa0;V using stirred and unstirred electrolyte conditions. The oxides produced from this method were amorphous (as synthesized) in all these conditions and became crystalline after the annealing process. This research showed that the nanotube length (minimum 600 and maximum 2300&#xa0;nm) increased with electrolyte stirring, applied voltage, and oxidation time. The electrolyte stirring retained the tubular structure and provided rib-structured nanotubes for both the potential conditions. This study showed that oxidation for 1&#xa0;h at 30&#xa0;V in the unstirred condition produced nanotubes with excellent corrosion resistance in simulated body fluid (SBF).</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Electrochemical Corrosion Performance of Anodic TiO2 Nanotubes Synthesized from Glycerol–NH4F Stirred Electrolytes

  • 期刊论文

  • 发表日期：

    2025年4月16日

查看全文
  • Narayanan Ramaswamy,
  • Mrutyunjay Panigrahi,
  • Vetrivel Sivaprakash,
  • M. N. M. Ansari,
  • Tae-Yub Kwon

摘要

Titanium oxide (TiO2) nanotubes produced on titanium (Ti) alloys by electrochemical anodic synthesis are used in biomedical and energy applications. Synthesis of these nanotubes involves fluoride ions, which travel in the electrolyte and reach the anodic Ti. Stirring of the electrolyte pushes the fluoride ions to move toward the anode and participate in oxidation. In this research work, anodic TiO2 was produced on Ti using 0.5 wt.% NH4F containing glycerol electrolyte (100 ml) for 20 and 30 V with the electrolyte being stirred by a magnetic pellet. Oxidation was done for 0.5 and 1 h at 20 V and 30 V using stirred and unstirred electrolyte conditions. The oxides produced from this method were amorphous (as synthesized) in all these conditions and became crystalline after the annealing process. This research showed that the nanotube length (minimum 600 and maximum 2300 nm) increased with electrolyte stirring, applied voltage, and oxidation time. The electrolyte stirring retained the tubular structure and provided rib-structured nanotubes for both the potential conditions. This study showed that oxidation for 1 h at 30 V in the unstirred condition produced nanotubes with excellent corrosion resistance in simulated body fluid (SBF).