Scholarlink

<p>Two distinct synthesis procedures have been employed to develop a magnetic–diatomite/carboxymethyl cellulose nanocomposite (MDM-CMC) for the efficient adsorptive removal of Cr (VI) from tannery effluent. These procedures involve co-precipitating the magnetic–diatomite nanocomposite (MDM) and solution blending with carboxymethyl cellulose (CMC). The nanocomposite adsorbents were characterized using XRD, FTIR, SEM, and superconducting quantum interference device (SQUID) magnetometry. The effects of operational factors on Cr (VI) removal efficiencies were investigated using the Box–Behnken design of response surface methodology (BBD-RSM). The factors examined included the starting Cr(VI) loads, pH, adsorbent dose, and contact duration. The MDM-CMC exhibited 89.73% Cr(VI) removal efficiencies and 7.13&#xa0;mg/g of adsorption capacities from tannery effluent in optimized operational conditions. The adsorption process was best described by the pseudo-second-order kinetic and the Freundlich isotherm, demonstrating the highest correlation coefficient (<i>R</i><sup>2</sup>) and the lowest chi-square (χ<sup>2</sup>) values, providing the best fit for the adsorption data. Thermodynamic analysis of the adsorption process indicated that it was endothermic and spontaneous, with the adsorbent exhibiting a degree of randomization in the aqueous solution.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Development of Magnetite–Diatomite/Carboxymethyl Cellulose Nanocomposite for Enhanced Chromium (VI) Removal from Tannery Effluent

  • 期刊论文

  • 发表日期：

    2025年3月13日

查看全文
  • Gemechu Lemessa,
  • Abayneh Getachew Demesa,
  • Yonas Chebude,
  • Ahmed Sedda,
  • Esayas Alemayehu

摘要

Two distinct synthesis procedures have been employed to develop a magnetic–diatomite/carboxymethyl cellulose nanocomposite (MDM-CMC) for the efficient adsorptive removal of Cr (VI) from tannery effluent. These procedures involve co-precipitating the magnetic–diatomite nanocomposite (MDM) and solution blending with carboxymethyl cellulose (CMC). The nanocomposite adsorbents were characterized using XRD, FTIR, SEM, and superconducting quantum interference device (SQUID) magnetometry. The effects of operational factors on Cr (VI) removal efficiencies were investigated using the Box–Behnken design of response surface methodology (BBD-RSM). The factors examined included the starting Cr(VI) loads, pH, adsorbent dose, and contact duration. The MDM-CMC exhibited 89.73% Cr(VI) removal efficiencies and 7.13 mg/g of adsorption capacities from tannery effluent in optimized operational conditions. The adsorption process was best described by the pseudo-second-order kinetic and the Freundlich isotherm, demonstrating the highest correlation coefficient (R2) and the lowest chi-square (χ2) values, providing the best fit for the adsorption data. Thermodynamic analysis of the adsorption process indicated that it was endothermic and spontaneous, with the adsorbent exhibiting a degree of randomization in the aqueous solution.