Scholarlink

<p>The mechanical surface treatment by deep rolling and burnishing is a widely used process in many industrial applications to optimize surface characteristics such as roughness, hardness and the residual stress state. Multiple process parameters (contact pressure, feed rate, tool diameter) need to be adapted to achieve an optimal treatment result, requiring major experimental efforts for the optimization process. Therefore, an approach was developed to simplify the optimization. The single target parameter for optimization in this approach is the overlap factor. This overlap factor can be simply determined experimentally from the width of single tracks, theoretically by Finite Element Analysis (FEA) or analytically by assuming linear elastic contact (Hertzian contact). The overlap factor was correlated with the surface condition after treatment (roughness, residual stress state) and an optimum value was proposed based on the treated material. For verification, the new approach was applied to Laser Bed Powder Fusion (LBPF) manufactured materials made of AlSi10Mg and 316L. To avoid overtreatment, i.e. an extensive plastic deformation of the surface during the process, an overlap factor of max. 90% was recommended based on former results. The predicted process parameters show the highest surface quality in this investigation.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A simple approach for the optimization of deep rolling and burnishing processes

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年6月3日

查看全文
  • Jan Schubnell,
  • Fabian Keil,
  • Sascha Fliegener,
  • Alexander Heiss

摘要

The mechanical surface treatment by deep rolling and burnishing is a widely used process in many industrial applications to optimize surface characteristics such as roughness, hardness and the residual stress state. Multiple process parameters (contact pressure, feed rate, tool diameter) need to be adapted to achieve an optimal treatment result, requiring major experimental efforts for the optimization process. Therefore, an approach was developed to simplify the optimization. The single target parameter for optimization in this approach is the overlap factor. This overlap factor can be simply determined experimentally from the width of single tracks, theoretically by Finite Element Analysis (FEA) or analytically by assuming linear elastic contact (Hertzian contact). The overlap factor was correlated with the surface condition after treatment (roughness, residual stress state) and an optimum value was proposed based on the treated material. For verification, the new approach was applied to Laser Bed Powder Fusion (LBPF) manufactured materials made of AlSi10Mg and 316L. To avoid overtreatment, i.e. an extensive plastic deformation of the surface during the process, an overlap factor of max. 90% was recommended based on former results. The predicted process parameters show the highest surface quality in this investigation.