<p>The long-term performance of bio-cemented geomaterials under cyclic environmental conditions is crucial for energy geotechnics applications. This study investigates the degradation mechanisms of thermal conductivity in enzyme-induced carbonate precipitation (EICP)-cemented sand under wetting-drying cycles, focusing on microstructural evolution. Homogeneous specimens with controlled saturation levels were prepared using a chemical-thermodynamic equilibrium approach. Nuclear magnetic resonance was correlated with thermal conductivity measurements to quantify the co-evolution of pore structure and thermal properties. Results demonstrate a nonlinear decrease in thermal conductivity with decreasing saturation, marked by a sharp transition below 15% saturation. wetting-drying cycles progressively coarsened the pore structure, transforming small and medium pores into larger voids and inducing an exponential decay in thermal conductivity with increasing porosity. Microstructural analysis reveals that highly cemented specimens, featuring dense and crystalline CaCO<sub>3</sub> networks, exhibit greater structural integrity and thermal stability, whereas low-cementation specimens undergo rapid deterioration. Furthermore, heat transfer efficiency is governed by CaCO<sub>3</sub> deposition patterns and crystal morphology: continuous cubic crystals establish low-resistance, face-to-face thermal pathways, in contrast to the less efficient point or line contacts formed by spherical or cylindrical crystals. This study elucidates the microstructural drivers of thermal degradation, providing critical insights for designing durable bio-cemented backfills in energy geostructures.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Mechanisms of thermal conductivity degradation in enzyme-induced carbonate precipitation-cemented sand subjected to wetting–drying cycles

  • Yidan Zhang,
  • Ming Huang,
  • Shuang Li,
  • Kai Xu,
  • Shuaixing Yan,
  • Junjie Zheng

摘要

The long-term performance of bio-cemented geomaterials under cyclic environmental conditions is crucial for energy geotechnics applications. This study investigates the degradation mechanisms of thermal conductivity in enzyme-induced carbonate precipitation (EICP)-cemented sand under wetting-drying cycles, focusing on microstructural evolution. Homogeneous specimens with controlled saturation levels were prepared using a chemical-thermodynamic equilibrium approach. Nuclear magnetic resonance was correlated with thermal conductivity measurements to quantify the co-evolution of pore structure and thermal properties. Results demonstrate a nonlinear decrease in thermal conductivity with decreasing saturation, marked by a sharp transition below 15% saturation. wetting-drying cycles progressively coarsened the pore structure, transforming small and medium pores into larger voids and inducing an exponential decay in thermal conductivity with increasing porosity. Microstructural analysis reveals that highly cemented specimens, featuring dense and crystalline CaCO3 networks, exhibit greater structural integrity and thermal stability, whereas low-cementation specimens undergo rapid deterioration. Furthermore, heat transfer efficiency is governed by CaCO3 deposition patterns and crystal morphology: continuous cubic crystals establish low-resistance, face-to-face thermal pathways, in contrast to the less efficient point or line contacts formed by spherical or cylindrical crystals. This study elucidates the microstructural drivers of thermal degradation, providing critical insights for designing durable bio-cemented backfills in energy geostructures.