Scholarlink

<p>Dielectric composites with high dielectric constant, minimal dielectric loss and low conductivity can well serve for energy storage capacitors. High dielectric loss is not favorable due to large energy waste. Here, to improve dielectric constant of poly(vinylidene fluoride–hexafluoropropylene) by electric percolation, semiconducting NiO filler was added to form composites. However, high leakage current from interfaces can lead to high dielectric loss. Doping insulating α-Al<sub>2</sub>O<sub>3</sub> particles with stable structure, low chemical activity and high modulus into above binary composites can reduce dielectric loss. By changing NiO dose, dielectric constant was well tailored. Dose of α-Al<sub>2</sub>O<sub>3</sub> was left unchanged. Dielectric loss, conductivity and dielectric constant of composites were measured. By the same NiO loading, dielectric loss, conductivity and dielectric constant in ternary composites can be reduced, compared with binary composites. The optimal ternary composite should contain 35&#xa0;wt% NiO and 4&#xa0;wt% α-Al<sub>2</sub>O<sub>3</sub>. Optimized dielectric traits of this composite can be reflected by dielectric constant of ~ 64 and dielectric loss of ~ 0.27 under 100&#xa0;Hz electric field.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimizing dielectric attributes of NiO/P(VDF–HFP) composite films through filling fine α-Al2O3 particles

  • 期刊论文

  • 发表日期：

    2025年6月22日

查看全文
  • Peng Gu

摘要

Dielectric composites with high dielectric constant, minimal dielectric loss and low conductivity can well serve for energy storage capacitors. High dielectric loss is not favorable due to large energy waste. Here, to improve dielectric constant of poly(vinylidene fluoride–hexafluoropropylene) by electric percolation, semiconducting NiO filler was added to form composites. However, high leakage current from interfaces can lead to high dielectric loss. Doping insulating α-Al2O3 particles with stable structure, low chemical activity and high modulus into above binary composites can reduce dielectric loss. By changing NiO dose, dielectric constant was well tailored. Dose of α-Al2O3 was left unchanged. Dielectric loss, conductivity and dielectric constant of composites were measured. By the same NiO loading, dielectric loss, conductivity and dielectric constant in ternary composites can be reduced, compared with binary composites. The optimal ternary composite should contain 35 wt% NiO and 4 wt% α-Al2O3. Optimized dielectric traits of this composite can be reflected by dielectric constant of ~ 64 and dielectric loss of ~ 0.27 under 100 Hz electric field.