Scholarlink

<p>In this study, the effect of the Zr(IV) polymerization degree in a nitric acid solution on the characteristics of hydrated zirconia particles and zirconia powders was investigated. Samples of hydrated zirconia were produced via the controlled double-jet precipitation (CDJP) method. The degree of Zr (IV) polymerization in the solution was varied by modifying the NO<sub>3</sub>/ZrO<sup>2+</sup> ratio. The properties of the hydrated zirconia particles and zirconia powders formed after calcination were investigated via laser diffraction, optical and scanning electron microscopy, X-ray phase analysis, thermogravimetry and BET. The polymerization of Zr (IV) involves the formation and elongation of polymer chains consisting of Zr<sub>4</sub>(OH)<sub>8</sub>(NO<sub>3</sub>)<sub>8</sub> tetramers. An increase in the degree of Zr (IV) polymerization leads to a decrease in the size of the crystallites and an increase in the diameter of the primary particles from 0.7 to 1.8&#xa0;µm. This facilitated the formation of dense aggregates with significantly reduced macroporosity. The mechanism of particle aggregation obtained by the CDJP method from a zirconium oxynitrate solution with different degrees of Zr(IV) polymerization was established and discussed in detail. The synthesized zirconia powders under consideration hold potential for use in thermal barrier coating applications via thermal spraying techniques.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Effect of Zr (IV) polymerization in nitric acid solution on the evolution of hydrated zirconia particles during controlled double-jet precipitation

  • 期刊论文

  • 发表日期：

    2025年7月1日

查看全文
  • Maksim A. Mashkovtsev,
  • Evgenie O. Baksheev,
  • Maksim A. Domashenkov,
  • Denis V. Khionin,
  • Nickolay D. Borodin,
  • Dmitry O. Polivoda,
  • Vitaliy O. Noskov

摘要

In this study, the effect of the Zr(IV) polymerization degree in a nitric acid solution on the characteristics of hydrated zirconia particles and zirconia powders was investigated. Samples of hydrated zirconia were produced via the controlled double-jet precipitation (CDJP) method. The degree of Zr (IV) polymerization in the solution was varied by modifying the NO3/ZrO2+ ratio. The properties of the hydrated zirconia particles and zirconia powders formed after calcination were investigated via laser diffraction, optical and scanning electron microscopy, X-ray phase analysis, thermogravimetry and BET. The polymerization of Zr (IV) involves the formation and elongation of polymer chains consisting of Zr4(OH)8(NO3)8 tetramers. An increase in the degree of Zr (IV) polymerization leads to a decrease in the size of the crystallites and an increase in the diameter of the primary particles from 0.7 to 1.8 µm. This facilitated the formation of dense aggregates with significantly reduced macroporosity. The mechanism of particle aggregation obtained by the CDJP method from a zirconium oxynitrate solution with different degrees of Zr(IV) polymerization was established and discussed in detail. The synthesized zirconia powders under consideration hold potential for use in thermal barrier coating applications via thermal spraying techniques.