Scholarlink

<p>High-entropy alloys have been widely applied in various fields such as medicine and national defense due to their unique properties. In order to further explore the potential applications of high-entropy alloys in the military field, a high-strength, high-toughness refractory high-entropy alloy (Ti<sub>2</sub>Zr)<sub>1.5</sub>NbVAl<sub>0.5</sub> was prepared using the vacuum arc melting method. The initial phase analysis of the alloy was conducted using scanning electron microscopy (SEM) and x-ray diffraction (XRD), indicating that the prepared alloy is a single-phase BCC high-entropy alloy rich in aluminum and zirconium elements. Subsequent mechanical performance tests were conducted, including quasi-static compression and tension tests, dynamic compression at room temperature, and dynamic compression experiments at high and low temperatures (400&#xa0;°C to − 80&#xa0;°C). Based on the experimental data, the parameters of the Johnson–Cook constitutive model and damage model were calibrated and obtained. Finally, the obtained parameters were validated through ballistic impact tests and numerical simulations, which showed a high degree of consistency between the two, thus confirming the accuracy of the obtained parameters. This also indicates that the Johnson–Cook constitutive model can be employed to predict the mechanical response of the (Ti<sub>2</sub>Zr)<sub>1.5</sub>NbVAl<sub>0.5</sub> high-entropy alloy under impact conditions.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

The Research on the Dynamic Damage Constitutive Model Parameters of the Novel TiZrNbVAl Refractory High-Entropy Alloy under Impact Conditions

  • 期刊论文

  • 发表日期：

    2025年3月17日

查看全文
  • Heling Zheng,
  • Zhanxuan Wang,
  • Zhengkun Li,
  • Jiangbo Wang,
  • Lizhi Xu,
  • Zhonghua Du

摘要

High-entropy alloys have been widely applied in various fields such as medicine and national defense due to their unique properties. In order to further explore the potential applications of high-entropy alloys in the military field, a high-strength, high-toughness refractory high-entropy alloy (Ti2Zr)1.5NbVAl0.5 was prepared using the vacuum arc melting method. The initial phase analysis of the alloy was conducted using scanning electron microscopy (SEM) and x-ray diffraction (XRD), indicating that the prepared alloy is a single-phase BCC high-entropy alloy rich in aluminum and zirconium elements. Subsequent mechanical performance tests were conducted, including quasi-static compression and tension tests, dynamic compression at room temperature, and dynamic compression experiments at high and low temperatures (400 °C to − 80 °C). Based on the experimental data, the parameters of the Johnson–Cook constitutive model and damage model were calibrated and obtained. Finally, the obtained parameters were validated through ballistic impact tests and numerical simulations, which showed a high degree of consistency between the two, thus confirming the accuracy of the obtained parameters. This also indicates that the Johnson–Cook constitutive model can be employed to predict the mechanical response of the (Ti2Zr)1.5NbVAl0.5 high-entropy alloy under impact conditions.