Scholarlink

<p>TiAl alloy was brazed with newly designed (Ti<sub>37.5</sub>Zr<sub>15</sub>Cu<sub>10</sub>Ni<sub>37.5</sub>)<sub>1-x</sub>Ta<sub>x</sub> filler metal. The impact of Ta content on the wettability of filler metals, wetting interfacial microstructure, brazed joint microstructure, and shear strength was examined. The microstructure and fracture behavior of typical brazed joints were also analyzed. It was demonstrated that the wettability of the brazing filler metal on the TiAl substrate gradually declines with an increase in Ta content. The residual filler metal layer also increased thickness due to the decline in filler metal flowability. A decent amount of Ta can inhibit the generation of intermetallic compounds in brazing filler metals. An excess of Ta element will impede the wetting reaction between the brazing filler metal and the base material, thereby compromising the quality of the brazed joint. The brazed joint mainly consists of a diffusion-affected zone close to the substrate and a central reaction zone. Diffusion-affected zone consists of successive <i>α</i><sub>2</sub>(Ti<sub>3</sub>Al) phases alternately. The reaction zone mainly consists of <i>α</i>-Ti, <i>γ</i>-(Ti, Zr)<sub>2</sub>(Cu, Ni) intermetallic compound and eutectoid phase generated by eutectoid decomposition of <i>β</i>-Ti. The filler metal with 1&#xa0;wt.% Ta was optimized for brazing of TiAl alloy with the maximum joint shear strength of 274&#xa0;MPa. The fracture occurs at the <i>α</i><sub>2</sub>(Ti<sub>3</sub>Al)/<i>γ</i>-(Ti, Zr)<sub>2</sub>(Cu, Ni) interface and propagates along the <i>α</i>-Ti/<i>γ</i>-(Ti, Zr)<sub>2</sub>(Cu, Ni) interface with brittle features.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Vacuum Brazing of TiAl Alloy with (Ti37.5Zr15Cu10Ni37.5)1-xTax Filler Metals

  • 期刊论文

  • 发表日期：

    2025年2月10日

查看全文
  • Gengyu Zhang,
  • Haichuan Shi,
  • Peilei Zhang,
  • Zhishui Yu,
  • Hua Yan,
  • Qinghua Lu,
  • Kaichang Yu

摘要

TiAl alloy was brazed with newly designed (Ti37.5Zr15Cu10Ni37.5)1-xTax filler metal. The impact of Ta content on the wettability of filler metals, wetting interfacial microstructure, brazed joint microstructure, and shear strength was examined. The microstructure and fracture behavior of typical brazed joints were also analyzed. It was demonstrated that the wettability of the brazing filler metal on the TiAl substrate gradually declines with an increase in Ta content. The residual filler metal layer also increased thickness due to the decline in filler metal flowability. A decent amount of Ta can inhibit the generation of intermetallic compounds in brazing filler metals. An excess of Ta element will impede the wetting reaction between the brazing filler metal and the base material, thereby compromising the quality of the brazed joint. The brazed joint mainly consists of a diffusion-affected zone close to the substrate and a central reaction zone. Diffusion-affected zone consists of successive α2(Ti3Al) phases alternately. The reaction zone mainly consists of α-Ti, γ-(Ti, Zr)2(Cu, Ni) intermetallic compound and eutectoid phase generated by eutectoid decomposition of β-Ti. The filler metal with 1 wt.% Ta was optimized for brazing of TiAl alloy with the maximum joint shear strength of 274 MPa. The fracture occurs at the α2(Ti3Al)/γ-(Ti, Zr)2(Cu, Ni) interface and propagates along the α-Ti/γ-(Ti, Zr)2(Cu, Ni) interface with brittle features.