Scholarlink

<p>The static softening (SS) behavior of a Cr-Co-Ni-Mo ultra-high strength stainless steel (UHSSS) was characterized in this work via the double-pass compression method. The SS fractions were determined by stress-strain curves at deformation temperature ranging from 950 to 1150&#xa0;°C, inter-pass time ranging from 10 to 300&#xa0;s, pre-strain ranging from 0.10 to 0.15, strain rate ranging from 0.1 to 5&#xa0;s<sup>−1</sup>, and initial austenite grain size ranging from 91 to 220&#xa0;μm. The experimental results show that the processing parameters greatly affect the SS fraction. The parent austenite grains were reconstructed by the <i>MTEX</i> toolbox. It shows increasing inter-pass time and deformation temperature can promote SS behavior. The SS fractions are supposed to include contributions both from static recovery and static recrystallization. The kinetics of SS for this UHSSS was established. The predicted results are in good agreement with the experimental results, which is supposed to be benefit for the thermomechanical possessing optimization.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Experimental Investigation of Static Softening Behavior of a Cr-Co-Ni-Mo Ultra-high Strength Stainless Steel in Double-Pass Compression

  • 期刊论文

  • 发表日期：

    2025年1月20日

查看全文
  • Hao-chen Ding,
  • Yi Ding,
  • Ying-hu Wang,
  • Ji-bin Pei,
  • Zhen-dong Sheng,
  • Chi Zhang,
  • Li-wen Zhang,
  • Huai-bei Zheng,
  • Shi-jun Wang

摘要

The static softening (SS) behavior of a Cr-Co-Ni-Mo ultra-high strength stainless steel (UHSSS) was characterized in this work via the double-pass compression method. The SS fractions were determined by stress-strain curves at deformation temperature ranging from 950 to 1150 °C, inter-pass time ranging from 10 to 300 s, pre-strain ranging from 0.10 to 0.15, strain rate ranging from 0.1 to 5 s−1, and initial austenite grain size ranging from 91 to 220 μm. The experimental results show that the processing parameters greatly affect the SS fraction. The parent austenite grains were reconstructed by the MTEX toolbox. It shows increasing inter-pass time and deformation temperature can promote SS behavior. The SS fractions are supposed to include contributions both from static recovery and static recrystallization. The kinetics of SS for this UHSSS was established. The predicted results are in good agreement with the experimental results, which is supposed to be benefit for the thermomechanical possessing optimization.