<p>The effect of pre-deformation on the precipitation behavior of an Al–Mg–Si alloy with high Cu content was investigated using scanning transmission electron microscopy and tensile test. In the undeformed sample, the microstructure mainly consists of GPB zones and L phase. In contrast, the deformed sample exhibits a dislocation-promoted hybrid precipitation structure. The dislocation provides nucleation sites and enhances solute diffusion, formation of GPB, L, C, Q’, S’, and <i>θ</i>’ phases both in dislocation lines and dislocation-free regions that improve mechanical properties.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Hybrid Precipitate Formation and Strengthening Behavior in a Severely Pre-deformed Al–Mg–Si–Cu Alloy

  • Ngoc Hai Vu,
  • Abrar Ahmed,
  • Seungwon Lee,
  • Taiki Tsuchiya,
  • Tetsuya Katsumi,
  • Kenji Matsuda

摘要

The effect of pre-deformation on the precipitation behavior of an Al–Mg–Si alloy with high Cu content was investigated using scanning transmission electron microscopy and tensile test. In the undeformed sample, the microstructure mainly consists of GPB zones and L phase. In contrast, the deformed sample exhibits a dislocation-promoted hybrid precipitation structure. The dislocation provides nucleation sites and enhances solute diffusion, formation of GPB, L, C, Q’, S’, and θ’ phases both in dislocation lines and dislocation-free regions that improve mechanical properties.