Scholarlink

<p>A solid, fast-dissolving sodium silicate was used as an alkaline activator. Granulated blast furnace slag (GGBS), metakaolin (MK), and steel slag (SS) were used as the cementious components to prepare a ternary composite cementitious material known as alkali-activated steel slag composite cementitious material (ASCM) by the “one-step method”. The impacts of cementitious components, alkali activator modulus, and Na<sub>2</sub>O% on the mechanical strength were investigated, and the hydration products and hydration kinetics of ASCM were analyzed. The experimental results reveal that XRD, FTIR, SEM, EDS, and exothermic heat of hydration show that when GGBS:MK:SS=60wt%:10wt%:30wt%, the activator modulus is 1.2, and the alkali content is 5.5wt%, the 28 d flexural strength of ASCM mortar is 12.6 MPa, and the compressive strength is 53.3 MPa, the hydration products consist of C-S-H gel/C-A-S-H gel, mullite (3Al<sub>2</sub>O<sub>3</sub>-2SiO<sub>2</sub>), calcite (CaCO<sub>3</sub>), quartz, <i>etc.</i> ASCM has a large initial hydration exotherm rate but a small cumulative exotherm.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Steel Slag Content on the Characteristics of “One-step” Alkali-activated Composite Cementitious Materials

  • 期刊论文

  • 发表日期：

    2025年7月24日

查看全文
  • Rui Ding,
  • Han Li,
  • Hao Tian,
  • Hongen Wang,
  • Yuqi Chen,
  • Wenfu Li

摘要

A solid, fast-dissolving sodium silicate was used as an alkaline activator. Granulated blast furnace slag (GGBS), metakaolin (MK), and steel slag (SS) were used as the cementious components to prepare a ternary composite cementitious material known as alkali-activated steel slag composite cementitious material (ASCM) by the “one-step method”. The impacts of cementitious components, alkali activator modulus, and Na2O% on the mechanical strength were investigated, and the hydration products and hydration kinetics of ASCM were analyzed. The experimental results reveal that XRD, FTIR, SEM, EDS, and exothermic heat of hydration show that when GGBS:MK:SS=60wt%:10wt%:30wt%, the activator modulus is 1.2, and the alkali content is 5.5wt%, the 28 d flexural strength of ASCM mortar is 12.6 MPa, and the compressive strength is 53.3 MPa, the hydration products consist of C-S-H gel/C-A-S-H gel, mullite (3Al2O3-2SiO2), calcite (CaCO3), quartz, etc. ASCM has a large initial hydration exotherm rate but a small cumulative exotherm.